Deleted user

you should output to both

if the hall sequence cannot be detected automaticly let user select with button and store it in flash so there is no need for them to compile firmware

I have a (at least I think) very good idea that is also very simple to make First the user should unplug the hall cable and push button The controller...

I still don't have the hardware I'll try when I got I've looked into the code it's a bit more complicated then I originally intisipated It'll take some time to...

The goal is I want to remove the need to compile any firmware our self so can you look into store the detectedPinout in eeprom and next startup if stored...

I think the hold pin should be the first to detect And the button pin Then the led and buzzer cannot be auto detected user should select manually with short...

I agree with the control should be handled by external microcontroller just like a odrive and talk to hoverboard via serial So yes auto detect the led via serial is...

can i ask a question what is the software maximium speed because https://github.com/RoboDurden/Hoverboard-Firmware-Hack-Gen2.x-GD32/blob/90d996c4a4eda57238d2b96337d01f8160a6fa61/HoverBoardGigaDevice/Src/bldc.c#L206 says the max speed is 1125 but https://github.com/RoboDurden/Hoverboard-Firmware-Hack-Gen2.x-GD32/blob/90d996c4a4eda57238d2b96337d01f8160a6fa61/HoverBoardGigaDevice/Src/commsMasterSlave.c#L210 its clamped to 1000 again i know its not...

and buzzer can also detect in same way assume its on master ofc i think you should make video when its more finished and is ready to detect everything like...

i agree,i will test it when i have hardware. i have a 3 phase control module in aluminium box maybe it can also support this?