raspberry-pi-pcie-devices

raspberry-pi-pcie-devices copied to clipboard

VL805 and µPD720201 not working on Pi 5

3

I'm testing vl805 and µPD720201 on pi5 and the usb adapter card doesn't work. # VL805 The pci card can be enumerated, but the usb device cannot be found and...

tltangliang

ASUS Xonar AE 7.1 - Tested & working

9

Tested the [Xonar AE 7.1 PCIe sound card](https://amzn.to/3ljTlUL) on a CM4 IO Board (4GB version).  Works with rpi-5.15.y branch (5.15.91-v8+ Kernel version). Add `dtoverlay=pcie-32bit-dma` to /boot/config.txt

siraaris

Test official Raspberry Pi NVMe SSD HAT

5

I don't have one, but I want one:   Some mentions of the HAT: - [Introducing: Raspberry Pi 5!](https://www.raspberrypi.com/news/introducing-raspberry-pi-5/) - [Heating and cooling Raspberry Pi 5](https://www.raspberrypi.com/news/heating-and-cooling-raspberry-pi-5/) > From early...

geerlingguy

Test Samsung PM991a 256GB SSD

4

I have just build up a CM4 based mini-server with a Samsung PM991a 2242 M2 265 GB SSD. SAMSUNG MZALQ256HBJD-00BL2 **Important**: The quite similar named Samsung PM9B1 does not work...

thmang82

Any test or experiences with PCIe NTB (Non-Transparent Bridge) or with a PCIe switch supporting NTB ? +PCI_EPF_NTB y https://www.kernel.org/doc/Documentation/ntb.txt

ohault

PCIe link down Edgelogix controller

2

Hi, I'm trying to get the ethernet switch working in the edgelogix, they are connected to the PCI express slot on the CM4. The CM4 has 2GB of ram. This...

Danny-VdH

Add AMD Radeon HD 6870 to site

5

Test with an used AMD Radeon HD 6870(about 15$ in China),I also write a [guide](https://gist.github.com/MartinRGB/67706045e3c485cce757b418bed59736) for this |Front| IO| Top | | -------------| ------------- | ------------- | || |...

MartinRGB

The [SaraKIT](https://www.crowdsupply.com/saraai/sarakit) is a CM4 carrier board "with ChatGPT-based voice control, motor control, powerful sensors, and tons of tutorials"   Their [demo video](https://www.youtube.com/watch?v=xBDiObW44dg) shows off a lot of uses,...

geerlingguy

Redditor Alastair [posted this CM4 blade server design](https://www.reddit.com/r/homelab/comments/17zo8t8/pi_compute_module_blade_server/) to the homelab subreddit, and it looks amazing!   It's 2U, and allows for up to 10 blades (Blade 4A), with...

geerlingguy

Test EVGA Nvidia RTX 3080 Ti on Raspberry Pi 5

12

I have tested the 3080 Ti on my Raspberry Pi 5 using Raspberry Pi's prototype PCIe adapter. It required an external power supply to feed that adapter and the card...

geerlingguy