raspberry-pi-pcie-devices
raspberry-pi-pcie-devices copied to clipboard
Raspberry Pi PCI Express device compatibility database
sshfs mount fails with the following error: ``` bash # sshfs [email protected]:/ /mnt/pi-ext4 fuse: mount failed: Permission denied ``` Adding `privileged: true` to the docker-compose.yml seems to resolve the problem,...
Twitter user [@exilsarahl](https://twitter.com/exilsarahl) is replacing the guts of an old Itronix GoBook with a custom 6-node Raspberry Pi CM4 clusterboard:    The hardware design will be open...
Devices I'd like to see: nVidia Geforce GTS 250 (unlikely) OCZ RevoDrive Hybrid (Any capacity, somewhat likely)
As the title says. TODO: Image goes here. I might need a new PSU to make sure I can supply power to this card... apparently it consumes up to 295W,...
BIGTREETECH has created an Allwinner H616 CM4 clone board, [the CB1, along with a 'PI4B' adapter board](https://biqu.equipment/collections/control-board/products/pi4b-adapter-v1-0?variant=39919128969314) that allows it or a CM4 to be used in the Pi 4...
The [Raspberry Pi Compute Module 4 USB 3.0 IO Board](https://datasheets.raspberrypi.com/cm4io/cm4iousb3-appnote.pdf) is a reference design for an IO Board with USB 3.0 in place of the exposed PCI Express slot. See:...
The [WLAN Pi Pro](https://wifistand.com/products/wlan-pi-pro) is a multi-purpose Wi-Fi analysis tool built around a Raspberry Pi CM4 and open-source software.   It features integrated Wi-Fi 6E, a Gigabit-Ethernet RJ45 (802.3af...
Hey everyone, I recently bought got a Raspberry Pi5 which I'd like to use for LinuxCNC. To have an additional NIC to interface with my machine I thought I'd be...
The PI-2230-SSD is an SSD expansion board specifically designed for the Raspberry PI 5 to provide PCIe to M.2 NVMe SSD function. The expansion board is designed based on the...
Mcuzone now has a [Dual 2.5 Gbps Ethernet HAT](https://www.aliexpress.us/item/3256806349773306.html) available on AliExpress.  It uses two RTL8125 2.5 Gbps NICs switched via some PCIe switch chip—it is hard to make...