faustolnx

I have modified the micropython example, see below, I have added the application but when activate the application I get these error: File "/home/fb/wasp-os/wasp/apps/eddystone.py", line 1, in from ubluepy import...

Hi, Yes i want integrate the application, and launch it in backgroud, for collect heart rate , steps, and send this data whit an Eddystone like packet, every 10 seconds....

Hi, also how import a module? whit this istruction i get error when start application from ubluepy import Peripheral, constants Thanks Fausto

Hi, for receiving the packets i have esp32 vhit arduino scan example installed. I would like to send the Eddystone with the hear rate every 10 seconds. but i can't...

In the nRFConnect App, I can't find any command to activate DFU.

The watch is in DFU I see the red square and ATCnetz.de I can't find the command to transfer the file in the nRFConnect App.

Excuse me Aaron, the DFU icon at the top right of the NRfConnect App?

OK thanks. For your help. It appears that it does not connect, and consequently the DFU icon does not appear. I try to reset everything.

Hi Aaron, after the reset he connected the DFU icon appeared, I tried to load the .zip file but there is no transfer. A few more suggestions. Thanks in advance

438 / 5000 Risultati della traduzione I Aaron, OK whit nRFConnect your firmware is successfully transferred and started. BUT my signature is not transferred and exits the transfer procedure. I...