Jacques Gagnon

Connect only gnd and 5v to start with no BlueRetro (cable only), if that work add each cable one by one until you find issue . Add BlueRetro at the...

Probably a short under one of the chip. Use a blank pcb first and connect GND and 5V only to validate empty pcb is fine. Then two options: either remove...

Sorry really no idea, maybe try pcb ls v1.1 as it is the board I used for saturn. Or use the AIO one.

Which controller are you using?

Try to format via a laptop if you used a phone, or just let tony hawk format it when prompted. If detection fail you can simply press reset on console,...

You might have some build related issues because I personally got none of those issues. Sound like your data line is glitching somehow.

If you can ask others to report feedback in this GitHub issues. Everyone with issue should list the following information if possible: * N64 motherboard revision * List of internal...

@bixxewoscht Anything is possible off course but the N64 is the original system BlueRetro was developed for and that I actually use myself a lot. I gone though GoldenEye a...

@Taurus1100 / @Taurus1099 I got your adapter today and made some quick test and it look to be working fine for me. See video: https://youtu.be/IBnAhmHv9O8 I tested with your F-Zero...

I think its likely the N64 digital that interferes with the pad data lines. I can test more this weekend but its likely all fine. I don't know much about...