Jacques Gagnon

@dryja123 ok weird, mine don't have solid led, thanks for testing. I'll just wait to get the board from Will.

Email me to darthcloud gmail.com (replace space with @) or DM me on twitter, we can coordinate this way. I'll pay fedex/ DHL overnight both way.

Does the input work? Is it only a LED issue?

Is it an official Sony DS3? Connect your ESP32 via USB (no need to wired to console) and get the log: https://github.com/darthcloud/BlueRetro/wiki/Getting-BlueRetro-debug-logs-via-Serial-port-Windows-10

Ok I don't mind helping you but you need to elaborate in your answer a little, if it's not an official one, then tell me the brand it is and...

Post a picture where we can see connection well.

You could try adding a 1uF and 100uF capacitor between the ESP32 3V3 and GND Digikey part: 1uF: 399-9886-1-ND 100uF: 565-4665-ND

If those pin are float and are unstable they might generate an infinite amount of interrupt that will crash in loop the adapter. Which will prevent BT connection. Wire all...

Try with an official ESP-DevKit-C (Get it on [Digikey](https://www.digikey.com/en/products/detail/espressif-systems/ESP32-DEVKITC-32E/12091810?s=N4IgTCBcDaIKYGcAOBmMBaAJnAbgawEsAXAY3TThAF0BfIA) or [Mouser](https://www.mouser.com/ProductDetail/Espressif-Systems/ESP32-DevKitC-32E?qs=sGAEpiMZZMv0NwlthflBi3XYxq%252BTapwyHnR2%2FrAf4bY%3D))

No idea at this point, sorry :(