Daniel Nilsson

No idea, current is passed through to display in units of 1/2 A. Read by ADC connected to motor control MCU, it's not capped by this firmware. Firmware has not...

Hi 1. Yes, some people have problem with this, seems to have mostly affected BBS02 but you have a BBSHD so thats new. 2. Unable to reproduce, never heard of...

One thing worth trying is to increase the lower throttle limit a bit, say to 1000mV. I have seen the default be a bit too low for some throttles causing...

Motor rpm, road speed, PAS power and throttle power can be limited individually for each assist lever. Check config tool page on wiki if unsure what each parameter do.

1. I will investigate, sounds like an edge case bug. 2. I think I know what this is, I might have seen it, will try to fix. 3. I'm not...

I'm not able to reproduce your first issue, does it occur when you hit the 20% speed limit (20kph if you use the default max speed of 100kph)? Is your...

Hi Yes this firmware does not support programming changes through egg rider at the moment. Some form of support is planned but it is not yet clear to what extent.

Yes, I have been a bit annoyed by this too lately. It's not really a keep current thing, this affects all types of pedal assist since current (A) is used...

Yes exactly, there is no point in compensating throttle power. But doing it globally after applying pas/cruise power would be an easy fix.

> I was also thinking about that, probably there is a reason that watts isn't used instead of current (amps)? My guess is voltage sags as you use current and...