Chris Weiss

just updated to 2021.11.02 and version 0.7.2 of this integration and Minute is only available on the panel totals, the rest have no _min sensor.

this is all i have in my logs, Looks like an auth error, like the update is killing my saved credentials. I don't see any way to just redo them....

I did a test using the attiny values and with an esp8266 and I got nothing at all. I don't have a level shitfer and this is the only 3.3V...

yeah. as i said, I coped the attiny values as they are both 8-bit 8Mhz AVR. the difference is the Mini does use an external crystal. I've no idea what...

BTW, my goal was to have an ESP and several Minis on the same bus, with the ESP acting as a web gateway. is this a reasonable and achievable goal?...

got the [Fio v1](https://www.sparkfun.com/products/10116) and the Pro Mini hooked up with short jumpers, no breadboard. both are 328p 3.3V 8Hz. using pjon 4.2, local, network analysis example I'm getting nothing...

can you really not see how that's a 10 mile overview and says nothing at all about what i should do? what I'm hearing you say is that without an...

to make sure I understand, I run the first on the Uno, and the 2nd on the Mini with a level shifter, and tweak the bit width for the mini...

how hard would it be make a test version that would try different values in some intelligent manner to locate the best value autonomously?

I was thinking something more like a discovery system to get values that produce some results and then could be manually tweaked in. either with a PC based program that...