beta-tester

i am also interested in that board and combining with your _nat_ project. i still waiting for the shippment of that board. in the meanwhile i found the following example,...

> Good afternoon, an interesting example eth2ap! I flashed my WT32-ETH01, there is a LAN8720 chip, but it did not want to work it doesn't work?! that's not good to...

do you mean the WT32-ETH01 does not get an IP or the device that is connected to the AP? as far as i understrood, in this eth2ap example, the WT32-ETH01...

this is the schematics i got: [WT32_ETH01_V2 schematic.pdf](https://github.com/martin-ger/esp32_nat_router/files/6025280/WT32_ETH01_V2.schematic.pdf) it looks like, there are no differences in the use of GPIO for RMII Signals and SMI Signals. the PHY reset line...

> @ericfont Where would I put this in a regular esp-idf project? I have an "sdkconfig" file but it looks different from the code above. i hope i don't tell...

via: - web interface + GPIO to reset to factory defaults - and/or GPIO jumper selecting IP out of two or four predefined IPs - and/or serial port command to...

@ArhiLeeve maybe you can add a method in the main entrypoint to customize the base mac just when ESP32 boots. see - https://github.com/espressif/esp-idf/blob/master/docs/en/api-reference/system/system.rst#base-mac-address - https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/system.html#base-mac-address this woiuld be maybe the...

any chance to run AliceVision/Meshroom - **_CPU only_** - without any specialized hardware, without nVidia, ... ? most of the discussion i see here is about nVidia, CUDA, AMD, Vulkan,...

when things can't be detected because of limitations of the environment, then maybe don't list them or mark them as kind of "not detectable" / _Yellow_. when WMIC isn't able...

please add Vectrex to list / GCE-Vectrex (vecx)