Mike Dunston

> Do you know this project and other projects like this one ? https://github.com/atanisoft/BaseStation This integrates the ESP8266 with the base station but doesn't have WiThrottle support (you can connect...

> I am looking for the support of WiThrottle (iOs) and EngineDriver (Android) directly to DCC++ without JMRI. https://github.com/msunderwd/BaseStation-Uno/tree/WiThrottle That may work but it doesn't have ESP support so you...

that looks like it would work on the ESP side to connect to an AP and translate the WiThrottle commands to DCC++ commands that you would need to feed back...

There are a number of options for this. I'd recommend looking into LCC (OpenLCB) or C/MRI.

Switching from EL3H7(B)(TA)-G to OR-6N136S-TA1 (or similar) will cut the rise/fall time considerably with only ~$0.20 increase in BOM cost. TLP785(GB-TP6,F(C is also an acceptable option and will cut the...

> however think that only supports +5V operation Ahh, yes. I forgot that tidbit. There are alternatives that are a bit smaller and operate at lower voltages. The other disadvantage...

C460576 is a direct replacement per the manufacturer and is in stock with JLC. EDIT: I did not check the datasheets so be sure to confirm before swapping.

I wouldn't say that FlashPrint is junk entirely, it just leaves a lot to be desired.

> Pls speed things up folks, native W5500 support is in demand. As board creator I do my part, please do yours as well. Thanks Being demanding is a quick...

> However, the situation obviously doesn't allow the board getting added to the official board lib as stated in [platformio/platform-espressif32#1123](https://github.com/platformio/platform-espressif32/issues/1123). Which is disappointing for me as board creator. It doesn't...