Arananet

Hi Martin, i'm Primy's friend. We are stuck on the same steps. We are unable to access via telnet to the device. All the step has been made as Primy...

oh! I see! will change it and upload the version! thanks for the update, for the current version you could solder 4 cables with a male connector to connect later...

sorry to hear that, i've updated the readme.md regarding this, it's actually not required, and as I comment, should be isolated.

Thats a good idea! i will try to update the little board with the video color amplifier. BR, Edu. El 10.08.2023 23:05, Stefan Reinauer escribió: > If you are respinning...

those pins are for another project which can be connected to this device. If you SD is not working, first check that the arduino has the correct fuses. Also check...

Thanks for point this out. I've made a comment on the gerbers-nano directory. https://github.com/arananet/Tapuino-Reloaded/tree/master/gerbers-nano

Now I see what your mean. So back jumper is to tell arduino's that there is an amp on the board. The front on-of is to shutdown the amplifier because...

 Maybe this photo will help to clarify this. Solder jumper is for select between direct output from D9 to the jack (without amplifier) or D9 To amplifier and finally...

The leds acts when the buffer has data to read/write. The original version does not include the buffer, but I added to stabilice the 3v3 signals and make those signals...

I always makes improvements on the design. Some are from the old design some of the new design. I want to change the amp to a more simple one and...