Alexander Horner

+1 for I don't have protanopia either, but the new colour not only is a pain on dark mode links, but I noticed on polls the black text on the...

> Current contrast ratio is at a low level, around 2.1:1.  @grishka's proposition reaches much higher values.  I assume this is in...

Bump! Source please!

Additional note: The lag is still present when using a wired setup with SPDIF digital audio out on the machine

> Will the author bother to answer my question... Hi arinc9, Apologies for the delay, I went to bed straight after my initial thumbs up to neheb, I do not...

@arinc9 @neheb Both of your reviews should now be completed as of 800dfdd I have left your reviews unresolved so you may mark them resolved yourselves if you are satisfied...

> @neheb why do we define the LEDs wired to the switch pins as GPIO? The switch pins which translate to GPIO 0, 3, 6, 9 and 12 already can...

> Confirming it is always useful, thanks! I'd suggest to revert this change, I only see disadvantages to it. > > Also make sure the said LEDs work as intended...

> If you don't change the function of these pins to GPIO by adding gpio-controller to the switch node, the default function of the pins do exactly what you're describing....

> > > If you don't change the function of these pins to GPIO by adding gpio-controller to the switch node, the default function of the pins do exactly what...