Akshar Vastarpara

@eboston @mstaack i am putting documentation tomorrow, schematics is already out there https://github.com/akshar001/Maypole_PCB keep this issue open until we make perfect documentation.

Hello guys, so here is the video https://youtu.be/VvWGthyjWB8 We still are working on some info, hope it helps!

We shall update this repo, give you a latest firmware all you need to do is, install dependent library and compile code on it and upload!

Ok.

@mstaack uploaded latest code also uploaded some instructions, let me know if you can't compile it or need anyhelp

Select esp32 dev module only. We have put the TTL logic inside, so just connect all the programmer pins to maypole ( if you don't have maypole with programmer )...

You have a maypole with programmer or without one?

@mstaack sorry for replying late, have you get it working, maypoles pins are 3.3V for USB to Serial please use FTDI and run at 3.3V. You will need to connect...

Hello @rsnbusa i am having the same probelem can you just elaborate how you solved it?

Thanks @Fleker, I have seen that you have been replying this type of issues from 2 years now, And glad that you still answers them, The problem is when i...