Raspberryy

Hey, that's interesting. Can you please share the idVendor, idProduct and the pnp_string you are using for printer emulation? Trying to split potential error sources here: 1. Have you made...

@ozgith Also, see this thread too, the last user reported that updating the system and running as root helped. Also try adding permission as described within the same thread https://github.com/Raspberryy/Emulated_USB_Printer/issues/6

Thanks for charing your parameters! 1. The printer.c contains functions for setting three parameters: Paper Loaded/Paper Out, Error/ No Error, and Selected / Not selected. The correct status is Selected,...

Hi, If I remember correctly, I had similar issues with a different printer (Xerox maybe), when it was recognized correctly but wouldn't sent the print job. I never tried solving...

How are you going to process the received print jobs? I found, that GhostPDL isn't an optimal solution for converting PCL, which HP printers are most likely to have. That...

If you connect the real printer you will of course need the actual driver. So, if you are planning to forward the print job to the real printer someday you...

All listed in the Makefile (except the Kyocera FS1020D) were detected by my Windows 10 PC. The Ricoh printers worked best. Do you get any error message? Do you still...

If you share I little mor of your setup, maybe we can help :) If you ever publish your project, keep me updated, I am really interested in seeing how...

Thats weird :/ You can share the USBlyzer capture file, maybe I can help you :)

Looks like the best solution is getting started on building your own version of the g_printer module. It looks quite similar to the emulated interface of the g_printer module (e.g....