OldCurmudgeon3DP

I figured out how to manage this in the specific STL I mentioned. I set external perimeters first as a part modifier then added a height modifier at layer 2...

So, I'm reprinting a cooling duct and tried the height range modifier again. It failed to perform as expected. I'm either getting double gcode on layer 1 such that the...

@supermerill does the API data get exported to the file?

Removed the data then resaved the 3mfs. Thin base was he first slice for testing. It generated 1 base layer before starting infill on layer 2. The path went as...

I'll add that while researching to set up my new moonraker install w/ Home Assistant I found a couple of examples on github on how to write the sensor entries....

I checked my settings... The model itself does not report as too large for the bed. It's the travel moves from the slicer using *avoid crossing perimeters* that caused the...

The first offending G1 is on line 138572. [Chute1-red.zip](https://github.com/OctoPrint/OctoPrint/files/5711021/Chute1-red.zip)

What I'll do in the meantime, if I have a print near the extents, is enable travel moves in the preview and/or open the gcode file in Notepad++ and search...

> I have a working teory. It is the way we turn off octoprint. We have to do shutdown octoprint, by the top right corner buton. So far, so good....

I wonder if any progress is happening here. Both contributors have activity this year in other repositories.