GoodnessJSON

When is this expected to be picked up in the main add-on? Would prefer not to swap to dev if I can help it to avoid any future headaches. Thanks...

This is a great suggestion!

I have this EXACT issue and it's driving me nuts. I can repeatedly send a Turn off Service call and toggle the bulb between off and 1%. These bulbs are...

> > One small finding... It will happen only once on a sequence of repeatedly "turn off" commands. For example: if I send another "turn off" while it is in...

> Unfortunately, your suggestion is not a real solution.... I completely agree and I'd like a full fix too. What you've described for non-status aware processes is something I've run...

> In your `configuration.yaml` (or `devices.yaml` if present), do you have a `transition` set for this device? I set mine to 0 seconds in Z2M UI Settings page since this...

> Can you try to completely remove it? (stop z2m, remove `transition` from the `configuration.yaml`, start z2m) Can confirm, this worked for me too! No more 1%. Fantastic!

> Can you try to completely remove it? (stop z2m, remove `transition` from the `configuration.yaml`, start z2m) @Koenkk could we formally include this in a fix to Z2M? As it...

> This is not a converter issue but a bug in the bulbs firmware, it seems to turn on when receiving a "move to brightness 0 twice" Can I ask...

Seems a browser cache refresh doesn't clear the issue. Will try and reinstall but hopefully it doesn't clear all the settings. EDIT: Reinstall fixed it but I had to reenter...