Vadim Kaushan

Serial test fails with timeout if USB 3.0 port is used to communicate with a HighSpeed device

2

Tested with the STM32F723E-DISCO board and the following example: https://github.com/Disasm/usb-otg-workspace/blob/master/example-f723e-disco-board/examples/serial.rs `serial-threadmark` tool was used to feed data to the serial port. Affected versions: at least 0.2.4 and 0.3.2. Same problem...

https://github.com/Disasm/usb-otg-workspace/tree/master/example-f723e-disco-board At the same time, OTG_HS with internal HS PHY works.

While analyzing the `Automated SDR` trace from lab 2 I noticed a lot of issues: * All 3 sales agents receive cold email input. IMO they shouldn't receive cold emails...

Fixes https://github.com/Yubico/yubikey-manager-qt/issues/364 and maybe a few other related issues.

Device fails to re-enumerate after firmware is updated. Power cycle is needed to trigger enumeration. This issue was observed on a board where external HS PHY is used. With internal...

Board: Longan Nano Steps to reproduce: * flash firmware with USB device enabled * connect Longan Nano to PC * flash another firmware with USB device enabled * observe that...