John

I'm sorry, I overlooked your question initially. Are the clamps around the hot wire only? If they are around the hot and neutral the readings will not be correct.

Thanks for the suggestion! I've been thinking about doing this in a future revision of the meter. There are small fuses that will trip before reaching the other electronics.

Sorry for not replying sooner. Yes, you can use this CT. However you will need to sever the jumper on the back of the board so the on-board burden resistor...

Hi @amil109 - I'm sorry it's giving you issues! It looks like you have the kit that came programmed. When you updated to v2.5.5, did you compile it, or just...

Your transformer is outputting enough current. What is the voltage output? Also is it one that plugs into the wall? Some people have had some issues with low grade transformers....

There isn't too much detail about how that transformer works on that page, but I can see that it's passed UK standards, so it's probably doing what it is supposed...

One other thing - Are you sending any data via MQTT? I just fixed a bug with that when it got disconnected.

I fixed an issue in the [latest release](https://github.com/CircuitSetup/Split-Single-Phase-Energy-Meter/releases) that would cause MQTT to try to reconnect for 14 min straight if the connection was lost. It was only supposed to...

Great! I'm glad to hear it's working better for you now.

Sorry @McGeaverBeaver, I overlooked your initial message. Did you update the firmware from the provided bin or did you compile from source? Also, when it randomly disconnects is there a...