zirblazer

> After testing 3rd and 4th power supply I found it appears to be an incompatibility issue with older power supplies and Dasharo. The +5VSB rail goes berserk in Corsair...

Some pointers from generic Hardware troubleshooting... 1 - Get second opinion with other modules. Temperature can vary wildly between different vendors and models, and some are actually bad, like using...

> 4x Crucial CT8G48C40U5 DDR5 4800 MT/s CL40 There is something VERY wrong here. According to Crucial that module seems to be just standard JEDEC with no XMP support whatsover:...

There was an user that bricked with Z690-A 1.1.3 and couldn't reflash Dasharo via FlashBIOS but got it to detect MSI BIOS. No idea if he managed to recover since...

> I tested the XMP P2 and P3, both fail in the same way as P1. > > The power button does a blink two times followed by a ~2...

> Even if it isn't possible to run the memory at 6000Mhz, there is a big gap between 4000 and 6000, I would think 4800 should be possible, and that...

> Does that not mean the memory clocked lower than the speed it's supposed to be running, I assume it should be possible to the default speed without using XMP....

> The CL36 4800 and 5600 presets work just fine, I don't really understand why it should be impossible to do the same with Dasharo. Because you're mostly limited to...

> @zirblazer, are you saying that 2 sticks DDR5 package shouldn't actually work at 5600MHz or above even on MSI firmware? I know that's what the docs say, but my...

The Z790-P does not actually have a community version, only the Z690-A, and it is the 2 years old 1.1.1 that doesn't even support Raptor Lake. What you can do...