zha-device-handlers
zha-device-handlers copied to clipboard
zigpy
ZHA device handlers bridge the functionality gap created when manufacturers deviate from the ZCL specification, handling deviations and exceptions by parsing custom messages to and from Zigbee devices...
### Problem description Want to read actions from Datek HBR2917E (Eva sceneselector)  ### Solution description Can connect, but no actions are visible. Should expose: battery, temperature, action, linkquality ###...
### Problem description What I am able to do: - Arm/disarm in differnt modes from the keypad itself and through Home Assistant. - Reading the code typed into the keypad,...
### Problem description Paring went smoothly but I don't see any sensors or entities ### Solution description Sensors and entities to display power in W and energy in kWh ###...
### Problem description When adding to ZHA only device exists, no entities. ### Solution description Device is added with all related entities (sensor, switch). If possible add sensitivity controls. ###...
### Problem description When adding TO-Q-SY2-163JZT to ZHA is coming up as TS011F by _TZ3000_cayepv1a - however this seems to be another product - TO-Q-SY1. TO-Q-SY1 can only do monitoring....
### Problem description Electrical measurements in this device not working properly - current and summation delivered (kWh) are too high. ### Solution description Please correct the current multiplier ### Screenshots/Video...
### Problem description This dimmer is not yet part of the "zhaquirks/tuya/ts0601_dimmer.py" file. ### Solution description Adding "("_TZE204_hlx9tnzb", "TS0601")," under "MODELS_INFO:" in "class "TuyaSingleSwitchDimmerGP(TuyaDimmerSwitch):" adds the ability to control thedevice...
### Problem description ZHA picks up the device but as a Smart Plug and only shows the Firmware status. I tried to use a quirk as exampled in various posts....
### Problem description Please can a handler be created to support a Tuya water valve controller (TS0049). The device can be added to home assistant via zha but no entities...
### Problem description the device is integrated without any sensor or control ### Solution description - The device has controls for closing or opening like a cover - The device...
