[BUG] Aqara Motion sensor always reports the temperature 29C

[sergey-suloev]

The snapshot is taken when the sensor is placed outdoor where the temperature at the moment is +5C

[sergey-suloev]

home-assistant.log

[dontinelli]

I have an issue with the Aqara Single Switch T1, which could be related to the above: Since the device temperature is reported, it seems to be constantly at 0.2°C, while I would expect a temperature of approx. 15°C. Interestingly, when I get the device temperature over the "cluster" dialog, it reports a device temperature of (currently) 15°C. Another switch (also located in the cellar, but in a different room) reports a temperature of 0.1°C or 0.2°C in the entity but 16°C in the "cluster" dialog (which could be correct). A third switch constantly reports 0.2°C in the entity but 25°C in the "cluster" dialog (which seems to be approx. 5° too high, but this could also be an inaccuracy of the measurement, I guess).

[github-actions[bot]]

There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.