zha-device-handlers [Device Support Request] Zemismart Curtain Motor with Rail (Mains powered) (_TZE200

Is your feature request related to a problem? Please describe. ts0601_cover.py needs a new quirk added to support this device properly. Currently, it pairs with no entities attached.

Describe the solution you'd like Be able to pair the device and control my curtains through HA.

Device signature - this can be acquired by removing the device from ZHA and pairing it again from the add devices screen. Be sure to add the entire content of the log panel after pairing the device to a code block below this line.

{
  "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress|RxOnWhenIdle|MainsPowered|FullFunctionDevice: 142>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)",
  "endpoints": {
    "1": {
      "profile_id": 260,
      "device_type": "0x0051",
      "in_clusters": [
        "0x0000",
        "0x0004",
        "0x0005",
        "0xef00"
      ],
      "out_clusters": [
        "0x000a",
        "0x0019"
      ]
    },
    "242": {
      "profile_id": 41440,
      "device_type": "0x0061",
      "in_clusters": [],
      "out_clusters": [
        "0x0021"
      ]
    }
  },
  "manufacturer": "_TZE200_rmymn92d",
  "model": "TS0601",
  "class": "zigpy.device.Device"
}

Jan 17 '22 19:01 operinko

I got it to add the Cover entity with this:

class TuyaZemismartCover0601_custom(TuyaWindowCover):
    """Tuya blind controller device."""

    signature = {
        # "node_descriptor": "NodeDescriptor(byte1=1, byte2=64, mac_capability_flags=142, manufacturer_code=4417,
        #                     maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752,
        #                     maximum_outgoing_transfer_size=66, descriptor_capability_field=0>,
        # "endpoints": {
        # "1": { "profile_id": 260, "device_type": "0x0051", "in_clusters": [ "0x0000", "0x0004","0x0005","0xef00"], "out_clusters": ["0x000a","0x0019"] },
        # "242": { "profile_id": 41440, "device_type": "0x0061", in_clusters": [], "out_clusters": [ "0x0021" ] }
        # },
        # "manufacturer": "_TZE200_rmymn92d",
        # "model": "TS0601",
        # "class": "zigpy.device.Device"
        # }
        MODELS_INFO: [
            ("_TZE200_rmymn92d", "TS0601"),
        ],
        ENDPOINTS: {
            1: {
                PROFILE_ID: 260,
                DEVICE_TYPE: 0x0051,
                INPUT_CLUSTERS: [
                    Basic.cluster_id,
                    Groups.cluster_id,
                    Scenes.cluster_id,
                    TuyaManufCluster.cluster_id,
                ],
                OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
            },
            242: {
                PROFILE_ID: 41440,
                DEVICE_TYPE: 0x0061,
                INPUT_CLUSTERS: [],
                OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
            },
        },
    }

    replacement = {
        ENDPOINTS: {
            1: {
                DEVICE_TYPE: zha.DeviceType.WINDOW_COVERING_DEVICE,
                INPUT_CLUSTERS: [
                    Basic.cluster_id,
                    Groups.cluster_id,
                    Scenes.cluster_id,
                    TuyaManufacturerWindowCover,
                    TuyaWindowCoverControl,
                ],
                OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
            },
            242: {
                PROFILE_ID: 41440,
                DEVICE_TYPE: 0x0061,
                INPUT_CLUSTERS: [],
                OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
            },
        }
    }

Just.. The buttons all throw:

Traceback (most recent call last):
  File "/usr/src/homeassistant/homeassistant/components/websocket_api/commands.py", line 185, in handle_call_service
    await hass.services.async_call(
  File "/usr/src/homeassistant/homeassistant/core.py", line 1495, in async_call
    task.result()
  File "/usr/src/homeassistant/homeassistant/core.py", line 1530, in _execute_service
    await handler.job.target(service_call)
  File "/usr/src/homeassistant/homeassistant/helpers/entity_component.py", line 209, in handle_service
    await self.hass.helpers.service.entity_service_call(
  File "/usr/src/homeassistant/homeassistant/helpers/service.py", line 663, in entity_service_call
    future.result()  # pop exception if have
  File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 896, in async_request_call
    await coro
  File "/usr/src/homeassistant/homeassistant/helpers/service.py", line 700, in _handle_entity_call
    await result
  File "/usr/src/homeassistant/homeassistant/components/zha/cover.py", line 132, in async_close_cover
    res = await self._cover_channel.down_close()
  File "/usr/src/homeassistant/homeassistant/components/zha/core/channels/base.py", line 59, in wrapper
    result = await command(*args, **kwds)
  File "/usr/local/lib/python3.9/site-packages/zhaquirks/tuya/__init__.py", line 1039, in command
    TUYA_COVER_COMMAND[manufacturer][command_id],
KeyError: '_TZE200_rmymn92d'

Jan 17 '22 19:01 operinko

@operinko check this https://github.com/zigpy/zha-device-handlers/issues/744#issuecomment-1010750485 Buttons works now without errors, but nothing happens

Jan 18 '22 06:01 Kiread-work

Any update on support this device?

Feb 17 '22 17:02 raphaeujp

@operinko When adding a custom quirk, you also want to update the information here: https://github.com/zigpy/zha-device-handlers/blob/e4e62504738ced0c54c983ee5094a3a6af0a741d/zhaquirks/tuya/init.py#L94-L111 (I don't know which codes need to be added here -- or if this is even enough)

(For some other device, TUYA_COVER_INVERTED_BY_DEFAULT also needs to be updated. But not for _TZE200_rmymn92d`` apparently.)

If I remember correctly the structure for the custom quirk directory should look like this then: /config/custom_quirks/tuya: -- __init.py__ (modified) -- ts0601_cover.py (modified)

Note: Also edit the ts0601_cover.py file and change the following line (13): from zhaquirks.tuya import ( to from . import (

Edit: Discussion continued in https://github.com/zigpy/zha-device-handlers/issues/1245#issuecomment-1053624641

Feb 27 '22 02:02 TheJulianJES

So you will see the device in HA, you can even check the status (open/close). But the buttons will not work /config/custom_zha_quirks/TS0601_Covertest.py

"""Tuya based cover and blinds."""
from zigpy.profiles import zha
from zigpy.zcl.clusters.general import Basic, Groups, Identify, OnOff, Ota, Scenes, Time, GreenPowerProxy
# from zigpy.zcl.clusters.closures import WindowCovering
# from zigpy.quirks import CustomCluster, CustomDevice
# import zigpy.types as t

from zhaquirks.const import (
    DEVICE_TYPE,
    ENDPOINTS,
    INPUT_CLUSTERS,
    MODELS_INFO,
    OUTPUT_CLUSTERS,
    PROFILE_ID,
)
from zhaquirks.tuya import (
    TuyaManufacturerWindowCover,
    TuyaManufCluster,
    TuyaWindowCover,
    TuyaWindowCoverControl,
)

class TuyaCover0601_TO_GPP(TuyaWindowCover):
    """Tuya blind controller device with time on out and GPP."""

    signature = {
        # "node_descriptor": "NodeDescriptor(byte1=2, byte2=64, mac_capability_flags=128, manufacturer_code=4098,
        #                    maximum_buffer_size=82, maximum_incoming_transfer_size=82, server_mask=11264,
        #                    maximum_outgoing_transfer_size=82, descriptor_capability_field=0)",
        # "endpoints": {
        # "1": { "profile_id": 260, "device_type": "0x0051", "in_clusters": [ "0x0000", "0x0004","0x0005","0xef00"],
        # "out_clusters": ["0x000a","0x0019"] } },
        MODELS_INFO: [
            ("_TZE200_r0jdjrvi", "TS0601"),
            ("_TZE200_rmymn92d", "TS0601"),
        ],
        ENDPOINTS: {
            1: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: 0x0051, # zha.DeviceType.SMART_PLUG,
                INPUT_CLUSTERS: [
                    Basic.cluster_id,
                    Groups.cluster_id,
                    Scenes.cluster_id,
                    TuyaManufCluster.cluster_id,
                    #WindowCovering.cluster_id
                ],
                OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
            },
            242: {
                # <SimpleDescriptor endpoint=242 profile=41440 device_type=97
                # input_clusters=[]
                # output_clusters=[33]
                PROFILE_ID: 41440,
                DEVICE_TYPE: 0x0061, #97,
                INPUT_CLUSTERS: [],
                OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
            },
        },
    }

    replacement = {
        ENDPOINTS: {
            1: {
                DEVICE_TYPE: zha.DeviceType.WINDOW_COVERING_DEVICE,
                INPUT_CLUSTERS: [
                    Basic.cluster_id,
                    Groups.cluster_id,
                    Scenes.cluster_id,
                    TuyaManufacturerWindowCover,
                    TuyaWindowCoverControl,
                    #TuyaCoveringCluster,
                ],
                OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
            },
            242: {
                PROFILE_ID: 41440,
                DEVICE_TYPE: 97,
                INPUT_CLUSTERS: [],
                OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
            },
        },
    }

/config/custom_zha_quirks/init.py lines 109-110

    "_TZE200_r0jdjrvi": {0x0000: 0x0000, 0x0001: 0x0002, 0x0002: 0x0001},
    "_TZE200_rmymn92d": {0x0000: 0x0000, 0x0001: 0x0002, 0x0002: 0x0001},

Feb 27 '22 09:02 Kiread-work

@Kiread-work. The new HA version borked my quirk. Actually the custom quirk borked my ZHA network so I've removed it which means it cannot even track state of _TZE200_rmymn92d. We have confirmation that the code is working in MQTT and I submitted a PR for the cover inversion in my journey to figure out the difference in the code but I think we're going to need a new custom quirk to use, is that correct? Something has changed where HA really didn't like that custom quirk being there.

How are things looking for you? still the same? This is now the last device in my home that HA cannot control :(

Apr 08 '22 17:04 SergeantPup

@SergeantPup shame on you =) Just updated HA to core-2022.4.1 on 5.10.108 HAOS and my Xiaomi Humidifier stoped working =)) Maybe I could find some time to restore integration with humidifier and windows cover status _TZE200_r0jdjrvi

Apr 09 '22 13:04 Kiread-work

@SergeantPup well it works (status, not buttons). Nothing changed. Button press drops another error now.

Apr 13 '22 08:04 Kiread-work

I put it back in and it borked my zha network again so I took it out again. Tracking the curtain isn't THAT important without control. This must be something trivial. Half tempted to just buy another head unit but I have a 50% shot it might be the same chip :(

Apr 13 '22 23:04 SergeantPup

Can you send the latest version of the quirk that used to "work"?
Is there anything in the (debug) logs when the quirk screws up ZHA?

Apr 13 '22 23:04 TheJulianJES

Hello Julian!

Here is the error I get when the quirk is present but makes the rest of my ZHA unresponsive:

Logger: homeassistant.config_entries
Source: custom_zha_quirks/tuya/__init__.py:263
First occurred: 8:04:45 PM (1 occurrences)
Last logged: 8:04:45 PM

Error setting up entry Zigbee Network for zha
Traceback (most recent call last):
  File "/usr/src/homeassistant/homeassistant/config_entries.py", line 335, in async_setup
    result = await component.async_setup_entry(hass, self)
  File "/usr/src/homeassistant/homeassistant/components/zha/__init__.py", line 99, in async_setup_entry
    setup_quirks(config)
  File "/usr/local/lib/python3.9/site-packages/zhaquirks/__init__.py", line 409, in setup
    importer.find_module(modname).load_module(modname)
  File "<frozen importlib._bootstrap_external>", line 529, in _check_name_wrapper
  File "<frozen importlib._bootstrap_external>", line 1029, in load_module
  File "<frozen importlib._bootstrap_external>", line 854, in load_module
  File "<frozen importlib._bootstrap>", line 274, in _load_module_shim
  File "<frozen importlib._bootstrap>", line 711, in _load
  File "<frozen importlib._bootstrap>", line 680, in _load_unlocked
  File "<frozen importlib._bootstrap_external>", line 850, in exec_module
  File "<frozen importlib._bootstrap>", line 228, in _call_with_frames_removed
  File "/config/custom_zha_quirks/tuya/__init__.py", line 263, in <module>
    class TuyaManufCluster(CustomCluster):
  File "/usr/local/lib/python3.9/site-packages/zigpy/zcl/__init__.py", line 91, in __init_subclass__
    raise TypeError(
TypeError: `manufacturer_client_commands` is deprecated. Copy the parent class's `client_commands` dictionary and update it with your manufacturer-specific `client_commands`. Make sure to specify that it is manufacturer-specific through the  appropriate constructor or tuple!

Here is the last known working quirk before the April update. tuya.zip

Apr 14 '22 00:04 SergeantPup

You can try this tuya folder: ~~tuya.zip~~ tuya.zip

Apr 14 '22 00:04 TheJulianJES

Logger: homeassistant.config_entries
Source: custom_zha_quirks/tuya/ts0601_cover.py:101
First occurred: 8:20:25 PM (1 occurrences)
Last logged: 8:20:25 PM

Error setting up entry Zigbee Network for zha
Traceback (most recent call last):
  File "/usr/src/homeassistant/homeassistant/config_entries.py", line 335, in async_setup
    result = await component.async_setup_entry(hass, self)
  File "/usr/src/homeassistant/homeassistant/components/zha/__init__.py", line 99, in async_setup_entry
    setup_quirks(config)
  File "/usr/local/lib/python3.9/site-packages/zhaquirks/__init__.py", line 409, in setup
    importer.find_module(modname).load_module(modname)
  File "<frozen importlib._bootstrap_external>", line 529, in _check_name_wrapper
  File "<frozen importlib._bootstrap_external>", line 1029, in load_module
  File "<frozen importlib._bootstrap_external>", line 854, in load_module
  File "<frozen importlib._bootstrap>", line 274, in _load_module_shim
  File "<frozen importlib._bootstrap>", line 711, in _load
  File "<frozen importlib._bootstrap>", line 680, in _load_unlocked
  File "<frozen importlib._bootstrap_external>", line 850, in exec_module
  File "<frozen importlib._bootstrap>", line 228, in _call_with_frames_removed
  File "/config/custom_zha_quirks/tuya/ts0601_cover.py", line 71, in <module>
    class TuyaZemismartSmartCover0601_4(TuyaWindowCover):
  File "/config/custom_zha_quirks/tuya/ts0601_cover.py", line 101, in TuyaZemismartSmartCover0601_4
    OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
NameError: name 'GreenPowerProxy' is not defined

Apr 14 '22 00:04 SergeantPup

Try this one: tuya.zip

Apr 14 '22 00:04 TheJulianJES

ZHA network and device tracking of _TZE200_rmymn92d are concurrently working again with 2022.4.3. Thank you!

I think I'm getting different errors for the _TZE200_rmymn92d command sends now (which is what the other user was reporting).

Here is a successful command on working device: _TZE200_xaabybja with Nwk: 0xd775 (this device works fine)

2022-04-13 20:45:41 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 89 (incomingRouteRecordHandler) received: b'75d7abb7d1feff81f68cffb401acc7'
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.zigbee.application] Received incomingRouteRecordHandler frame with [0xd775, 8c:f6:81:ff:fe:d1:b7:ab, 255, -76, [0xc7ac]]
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.zigbee.application] Processing route record request: (0xd775, 8c:f6:81:ff:fe:d1:b7:ab, 255, -76, [0xc7ac])
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000cfffb775d7ffff0a09530100c7070400010004'
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=207), 255, -73, 0xd775, 255, 255, b'\tS\x01\x00\xc7\x07\x04\x00\x01\x00']
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xD775:1:0xef00] Received ZCL frame: b'\tS\x01\x00\xc7\x07\x04\x00\x01\x00'
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xD775:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=83, command_id=1, *is_reply=True)
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xD775:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=199, command_id=1031, function=0, data=[1, 0]))
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xD775:1:0xef00] Received command 0x01 (TSN 83): get_data(param=Command(status=0, tsn=199, command_id=1031, function=0, data=[1, 0]))
2022-04-13 20:45:41 DEBUG (MainThread) [tuya] 8c:f6:81:ff:fe:d1:b7:ab Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 199, Command: 0x0407, Function: 0x00, Data: [1, 0]]
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 89 (incomingRouteRecordHandler) received: b'75d7abb7d1feff81f68cffb801acc7'
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.zigbee.application] Received incomingRouteRecordHandler frame with [0xd775, 8c:f6:81:ff:fe:d1:b7:ab, 255, -72, [0xc7ac]]
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.zigbee.application] Processing route record request: (0xd775, 8c:f6:81:ff:fe:d1:b7:ab, 255, -72, [0xc7ac])
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000d0ffb575d7ffff0d09540100c8030200040000006404'
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=208), 255, -75, 0xd775, 255, 255, b'\tT\x01\x00\xc8\x03\x02\x00\x04\x00\x00\x00d']
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xD775:1:0xef00] Received ZCL frame: b'\tT\x01\x00\xc8\x03\x02\x00\x04\x00\x00\x00d'
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xD775:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=84, command_id=1, *is_reply=True)
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xD775:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=200, command_id=515, function=0, data=[4, 0, 0, 0, 100]))
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xD775:1:0xef00] Received command 0x01 (TSN 84): get_data(param=Command(status=0, tsn=200, command_id=515, function=0, data=[4, 0, 0, 0, 100]))
2022-04-13 20:45:41 DEBUG (MainThread) [tuya] 8c:f6:81:ff:fe:d1:b7:ab Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 200, Command: 0x0203, Function: 0x00, Data: [4, 0, 0, 0, 100]]
2022-04-13 20:45:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xD775:1:0x0102]: Attribute report 'Window Covering'[current_position_lift_percentage] = 100
2022-04-13 20:45:41 DEBUG (MainThread) [tuya] 8c:f6:81:ff:fe:d1:b7:ab Tuya Attribute Cache : [{8: 100}]
2022-04-13 20:45:41 DEBUG (MainThread) [homeassistant.components.zha.cover] setting position: 100

Here is the new error from _TZE200_rmymn92d with Nwk: 0xc7ac (this is the device that's accurately tracking state and not responding to button presses).

2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Sending request header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=True, is_reply=0, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), manufacturer=4417, tsn=95, command_id=0, *is_reply=False)
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Sending request: set_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 1]))
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.ezsp.protocol] Send command sendUnicast: (<EmberOutgoingMessageType.OUTGOING_DIRECT: 0>, 0xC7AC, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY|APS_OPTION_RETRY: 320>, groupId=0, sequence=95), 96, b'\x05A\x11_\x00\x00\x00\x01\x04\x00\x01\x01')
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 52 (sendUnicast) received: b'00a8'
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 63 (messageSentHandler) received: b'00acc7040100ef010140010000a8600000'
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.zigbee.application] Received messageSentHandler frame with [<EmberOutgoingMessageType.OUTGOING_DIRECT: 0>, 51116, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY|APS_OPTION_RETRY: 320>, groupId=0, sequence=168), 96, <EmberStatus.SUCCESS: 0>, b'']
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef0101000100003effb5acc7ffff05185f0b008302'
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=62), 255, -75, 0xc7ac, 255, 255, b'\x18_\x0b\x00\x83']
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Received ZCL frame: b'\x18_\x0b\x00\x83'
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=0, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=95, command_id=11, *is_reply=True)
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:Default_Response(command_id=0, status=<Status.UNSUP_MANUF_CLUSTER_COMMAND: 131>)
2022-04-13 20:45:41 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xC7AC:1:0x0102]: executed 'stop' command with args: '()' kwargs: '{}' result: Default_Response(command_id=0, status=<Status.UNSUP_MANUF_CLUSTER_COMMAND: 131>)
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 89 (incomingRouteRecordHandler) received: b'75d7abb7d1feff81f68cffb401acc7'
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.zigbee.application] Received incomingRouteRecordHandler frame with [0xd775, 8c:f6:81:ff:fe:d1:b7:ab, 255, -76, [0xc7ac]]
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.zigbee.application] Processing route record request: (0xd775, 8c:f6:81:ff:fe:d1:b7:ab, 255, -76, [0xc7ac])
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000cfffb775d7ffff0a09530100c7070400010004'
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=207), 255, -73, 0xd775, 255, 255, b'\tS\x01\x00\xc7\x07\x04\x00\x01\x00']
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xD775:1:0xef00] Received ZCL frame: b'\tS\x01\x00\xc7\x07\x04\x00\x01\x00'
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xD775:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=83, command_id=1, *is_reply=True)
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xD775:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=199, command_id=1031, function=0, data=[1, 0]))
2022-04-13 20:45:41 DEBUG (MainThread) [zigpy.zcl] [0xD775:1:0xef00] Received command 0x01 (TSN 83): get_data(param=Command(status=0, tsn=199, command_id=1031, function=0, data=[1, 0]))
2022-04-13 20:45:41 DEBUG (MainThread) [tuya] 8c:f6:81:ff:fe:d1:b7:ab Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 199, Command: 0x0407, Function: 0x00, Data: [1, 0]]
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 89 (incomingRouteRecordHandler) received: b'75d7abb7d1feff81f68cffb801acc7'
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.zigbee.application] Received incomingRouteRecordHandler frame with [0xd775, 8c:f6:81:ff:fe:d1:b7:ab, 255, -72, [0xc7ac]]
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.zigbee.application] Processing route record request: (0xd775, 8c:f6:81:ff:fe:d1:b7:ab, 255, -72, [0xc7ac])
2022-04-13 20:45:41 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000d0ffb575d7ffff0d09540100c8030200040000006404'

Apr 14 '22 00:04 SergeantPup

Just to confirm, do your debug logs (from [tuya]) ever log something including the text Sending Tuya? (when sending an open/close command to a working cover and/or the non-working one)

Apr 14 '22 01:04 TheJulianJES

I just ran an open/stop/close command on _TZE200_xaabybja 0xb41c. 61 entries for "0xb41c" and 38 entries for "tuya" (none say sending:

2022-04-13 21:31:34 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received command 0x01 (TSN 89): get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:34 DEBUG (MainThread) [tuya] b4:e3:f9:ff:fe:0c:51:6e Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 0, Command: 0x0401, Function: 0x00, Data: [1, 2]]
2022-04-13 21:31:35 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000b5ffbf1cb4ffff0a09590100000104000102'
2022-04-13 21:31:35 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=181), 255, -65, 0xb41c, 255, 255, b'\tY\x01\x00\x00\x01\x04\x00\x01\x02']
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received ZCL frame: b'\tY\x01\x00\x00\x01\x04\x00\x01\x02'
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=89, command_id=1, *is_reply=True)
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received command 0x01 (TSN 89): get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:35 DEBUG (MainThread) [tuya] b4:e3:f9:ff:fe:0c:51:6e Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 0, Command: 0x0401, Function: 0x00, Data: [1, 2]]
2022-04-13 21:31:35 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000b6ffbf1cb4ffff0a09590100000104000102'
2022-04-13 21:31:35 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=182), 255, -65, 0xb41c, 255, 255, b'\tY\x01\x00\x00\x01\x04\x00\x01\x02']
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received ZCL frame: b'\tY\x01\x00\x00\x01\x04\x00\x01\x02'
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=89, command_id=1, *is_reply=True)
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received command 0x01 (TSN 89): get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:35 DEBUG (MainThread) [tuya] b4:e3:f9:ff:fe:0c:51:6e Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 0, Command: 0x0401, Function: 0x00, Data: [1, 2]]
2022-04-13 21:31:35 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000b7ffbf1cb4ffff0a09590100000104000102'
2022-04-13 21:31:35 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=183), 255, -65, 0xb41c, 255, 255, b'\tY\x01\x00\x00\x01\x04\x00\x01\x02']
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received ZCL frame: b'\tY\x01\x00\x00\x01\x04\x00\x01\x02'
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=89, command_id=1, *is_reply=True)
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received command 0x01 (TSN 89): get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:35 DEBUG (MainThread) [tuya] b4:e3:f9:ff:fe:0c:51:6e Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 0, Command: 0x0401, Function: 0x00, Data: [1, 2]]
2022-04-13 21:31:35 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000b8ffbf1cb4ffff0a09590100000104000102'
2022-04-13 21:31:35 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=184), 255, -65, 0xb41c, 255, 255, b'\tY\x01\x00\x00\x01\x04\x00\x01\x02']
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received ZCL frame: b'\tY\x01\x00\x00\x01\x04\x00\x01\x02'
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=89, command_id=1, *is_reply=True)
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received command 0x01 (TSN 89): get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:35 DEBUG (MainThread) [tuya] b4:e3:f9:ff:fe:0c:51:6e Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 0, Command: 0x0401, Function: 0x00, Data: [1, 2]]
2022-04-13 21:31:35 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000b9ffbf1cb4ffff0a09590100000104000102'
2022-04-13 21:31:35 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=185), 255, -65, 0xb41c, 255, 255, b'\tY\x01\x00\x00\x01\x04\x00\x01\x02']
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received ZCL frame: b'\tY\x01\x00\x00\x01\x04\x00\x01\x02'
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=89, command_id=1, *is_reply=True)
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:35 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received command 0x01 (TSN 89): get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:35 DEBUG (MainThread) [tuya] b4:e3:f9:ff:fe:0c:51:6e Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 0, Command: 0x0401, Function: 0x00, Data: [1, 2]]
2022-04-13 21:31:36 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000baffbe1cb4ffff0a09590100000104000102'
2022-04-13 21:31:36 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=186), 255, -66, 0xb41c, 255, 255, b'\tY\x01\x00\x00\x01\x04\x00\x01\x02']
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received ZCL frame: b'\tY\x01\x00\x00\x01\x04\x00\x01\x02'
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=89, command_id=1, *is_reply=True)
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received command 0x01 (TSN 89): get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:36 DEBUG (MainThread) [tuya] b4:e3:f9:ff:fe:0c:51:6e Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 0, Command: 0x0401, Function: 0x00, Data: [1, 2]]
2022-04-13 21:31:36 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'0004010005010140010000fbffbfd7dcffff09092200210000000000'
2022-04-13 21:31:36 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=1280, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY|APS_OPTION_RETRY: 320>, groupId=0, sequence=251), 255, -65, 0xdcd7, 255, 255, b'\t"\x00!\x00\x00\x00\x00\x00']
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xDCD7:1:0x0500] Received ZCL frame: b'\t"\x00!\x00\x00\x00\x00\x00'
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xDCD7:1:0x0500] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=34, command_id=0, *is_reply=True)
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xDCD7:1:0x0500] Decoded ZCL frame: IasZone:status_change_notification(zone_status=<ZoneStatus.Restore_reports|Alarm_1: 33>, extended_status=<bitmap8.0: 0>, zone_id=0, delay=0)
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xDCD7:1:0x0500] Received command 0x00 (TSN 34): status_change_notification(zone_status=<ZoneStatus.Restore_reports|Alarm_1: 33>, extended_status=<bitmap8.0: 0>, zone_id=0, delay=0)
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xDCD7:1:0x0500] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=34, command_id=<GeneralCommand.Default_Response: 11>, *is_reply=True)
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xDCD7:1:0x0500] Sending reply: Default_Response(command_id=0, status=<Status.SUCCESS: 0>)
2022-04-13 21:31:36 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xDCD7:1:0x0500]: Updated alarm state: ZoneStatus.Alarm_1
2022-04-13 21:31:36 DEBUG (MainThread) [bellows.ezsp.protocol] Send command sendUnicast: (<EmberOutgoingMessageType.OUTGOING_DIRECT: 0>, 0xDCD7, EmberApsFrame(profileId=260, clusterId=1280, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY|APS_OPTION_RETRY: 320>, groupId=0, sequence=34), 147, b'\x18"\x0b\x00\x00')
2022-04-13 21:31:36 DEBUG (MainThread) [homeassistant.core] Bus:Handling <Event state_changed[L]: entity_id=binary_sensor.media_room_motion_sensor, old_state=<state binary_sensor.media_room_motion_sensor=off; device_class=motion, friendly_name=Media Room Motion Sensor @ 2022-04-13T21:31:24.290528-04:00>, new_state=<state binary_sensor.media_room_motion_sensor=on; device_class=motion, friendly_name=Media Room Motion Sensor @ 2022-04-13T21:31:36.257601-04:00>>
2022-04-13 21:31:36 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 52 (sendUnicast) received: b'0089'
2022-04-13 21:31:36 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000bbffbe1cb4ffff0a09590100000104000102'
2022-04-13 21:31:36 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=187), 255, -66, 0xb41c, 255, 255, b'\tY\x01\x00\x00\x01\x04\x00\x01\x02']
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received ZCL frame: b'\tY\x01\x00\x00\x01\x04\x00\x01\x02'
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=89, command_id=1, *is_reply=True)
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received command 0x01 (TSN 89): get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:36 DEBUG (MainThread) [tuya] b4:e3:f9:ff:fe:0c:51:6e Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 0, Command: 0x0401, Function: 0x00, Data: [1, 2]]
2022-04-13 21:31:36 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 63 (messageSentHandler) received: b'00d7dc0401000501014001000089930000'
2022-04-13 21:31:36 DEBUG (MainThread) [bellows.zigbee.application] Received messageSentHandler frame with [<EmberOutgoingMessageType.OUTGOING_DIRECT: 0>, 56535, EmberApsFrame(profileId=260, clusterId=1280, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY|APS_OPTION_RETRY: 320>, groupId=0, sequence=137), 147, <EmberStatus.SUCCESS: 0>, b'']
2022-04-13 21:31:36 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000bcf0bf1cb4ffff0a09590100000104000102'
2022-04-13 21:31:36 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=188), 240, -65, 0xb41c, 255, 255, b'\tY\x01\x00\x00\x01\x04\x00\x01\x02']
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received ZCL frame: b'\tY\x01\x00\x00\x01\x04\x00\x01\x02'
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=89, command_id=1, *is_reply=True)
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received command 0x01 (TSN 89): get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:36 DEBUG (MainThread) [tuya] b4:e3:f9:ff:fe:0c:51:6e Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 0, Command: 0x0401, Function: 0x00, Data: [1, 2]]
2022-04-13 21:31:36 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000bdffbf1cb4ffff0a09590100000104000102'
2022-04-13 21:31:36 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=189), 255, -65, 0xb41c, 255, 255, b'\tY\x01\x00\x00\x01\x04\x00\x01\x02']
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received ZCL frame: b'\tY\x01\x00\x00\x01\x04\x00\x01\x02'
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=89, command_id=1, *is_reply=True)
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:36 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received command 0x01 (TSN 89): get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:36 DEBUG (MainThread) [tuya] b4:e3:f9:ff:fe:0c:51:6e Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 0, Command: 0x0401, Function: 0x00, Data: [1, 2]]
2022-04-13 21:31:37 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000beffbf1cb4ffff0a09590100000104000102'
2022-04-13 21:31:37 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=190), 255, -65, 0xb41c, 255, 255, b'\tY\x01\x00\x00\x01\x04\x00\x01\x02']
2022-04-13 21:31:37 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received ZCL frame: b'\tY\x01\x00\x00\x01\x04\x00\x01\x02'
2022-04-13 21:31:37 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=89, command_id=1, *is_reply=True)
2022-04-13 21:31:37 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:37 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received command 0x01 (TSN 89): get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:37 DEBUG (MainThread) [tuya] b4:e3:f9:ff:fe:0c:51:6e Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 0, Command: 0x0401, Function: 0x00, Data: [1, 2]]
2022-04-13 21:31:37 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000bfffbf1cb4ffff0a09590100000104000102'
2022-04-13 21:31:37 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=191), 255, -65, 0xb41c, 255, 255, b'\tY\x01\x00\x00\x01\x04\x00\x01\x02']
2022-04-13 21:31:37 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received ZCL frame: b'\tY\x01\x00\x00\x01\x04\x00\x01\x02'
2022-04-13 21:31:37 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=89, command_id=1, *is_reply=True)
2022-04-13 21:31:37 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:37 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received command 0x01 (TSN 89): get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:37 DEBUG (MainThread) [tuya] b4:e3:f9:ff:fe:0c:51:6e Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 0, Command: 0x0401, Function: 0x00, Data: [1, 2]]
2022-04-13 21:31:37 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000c0ffbf1cb4ffff0a09590100000104000102'
2022-04-13 21:31:37 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=192), 255, -65, 0xb41c, 255, 255, b'\tY\x01\x00\x00\x01\x04\x00\x01\x02']
2022-04-13 21:31:37 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received ZCL frame: b'\tY\x01\x00\x00\x01\x04\x00\x01\x02'
2022-04-13 21:31:37 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=89, command_id=1, *is_reply=True)
2022-04-13 21:31:37 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:37 DEBUG (MainThread) [zigpy.zcl] [0xB41C:1:0xef00] Received command 0x01 (TSN 89): get_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2]))
2022-04-13 21:31:37 DEBUG (MainThread) [tuya] b4:e3:f9:ff:fe:0c:51:6e Received Attribute Report. Command is 0x0001, Tuya Paylod values[Status : 0, TSN: 0, Command: 0x0401, Function: 0x00, Data: [1, 2]]

Apr 14 '22 01:04 SergeantPup

The device that's tracking state but not controlling has "sending tuya" commands:

2022-04-13 21:39:18 DEBUG (MainThread) [bellows.ezsp.protocol] Send command nop: ()
2022-04-13 21:39:18 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 5 (nop) received: b''
2022-04-13 21:39:18 DEBUG (MainThread) [homeassistant.core] Bus:Handling <Event call_service[L]: domain=cover, service=open_cover, service_data=entity_id=cover.media_room_curtains_2>
2022-04-13 21:39:18 DEBUG (MainThread) [tuya] a4:c1:38:bd:76:6f:43:4c Sending Tuya Cluster Command.. Manufacturer is _TZE200_rmymn92d Cluster Command is 0x0000, Arguments are ()
2022-04-13 21:39:18 DEBUG (MainThread) [tuya] a4:c1:38:bd:76:6f:43:4c Sending Tuya Command. Paylod values [endpoint_id : 1, Status : 0, TSN: 0, Command: 0x0401, Function: 0, Data: [1, 0]]
2022-04-13 21:39:18 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Sending request header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=True, is_reply=0, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), manufacturer=4417, tsn=58, command_id=0, *is_reply=False)
2022-04-13 21:39:18 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Sending request: set_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 0]))
2022-04-13 21:39:18 DEBUG (MainThread) [bellows.ezsp.protocol] Send command sendUnicast: (<EmberOutgoingMessageType.OUTGOING_DIRECT: 0>, 0xC7AC, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY|APS_OPTION_RETRY: 320>, groupId=0, sequence=58), 59, b'\x05A\x11:\x00\x00\x00\x01\x04\x00\x01\x00')
2022-04-13 21:39:18 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 52 (sendUnicast) received: b'001a'
2022-04-13 21:39:18 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 63 (messageSentHandler) received: b'00acc7040100ef0101400100001a3b0000'
2022-04-13 21:39:18 DEBUG (MainThread) [bellows.zigbee.application] Received messageSentHandler frame with [<EmberOutgoingMessageType.OUTGOING_DIRECT: 0>, 51116, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY|APS_OPTION_RETRY: 320>, groupId=0, sequence=26), 59, <EmberStatus.SUCCESS: 0>, b'']
2022-04-13 21:39:18 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000ccfdb6acc7ffff05183a0b008302'
2022-04-13 21:39:18 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=204), 253, -74, 0xc7ac, 255, 255, b'\x18:\x0b\x00\x83']
2022-04-13 21:39:18 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Received ZCL frame: b'\x18:\x0b\x00\x83'
2022-04-13 21:39:18 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=0, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=58, command_id=11, *is_reply=True)
2022-04-13 21:39:18 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:Default_Response(command_id=0, status=<Status.UNSUP_MANUF_CLUSTER_COMMAND: 131>)
2022-04-13 21:39:18 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xC7AC:1:0x0102]: executed 'up_open' command with args: '()' kwargs: '{}' result: Default_Response(command_id=0, status=<Status.UNSUP_MANUF_CLUSTER_COMMAND: 131>)
2022-04-13 21:39:20 DEBUG (MainThread) [homeassistant.core] Bus:Handling <Event call_service[L]: domain=cover, service=stop_cover, service_data=entity_id=cover.media_room_curtains_2>
2022-04-13 21:39:20 DEBUG (MainThread) [tuya] a4:c1:38:bd:76:6f:43:4c Sending Tuya Cluster Command.. Manufacturer is _TZE200_rmymn92d Cluster Command is 0x0002, Arguments are ()
2022-04-13 21:39:20 DEBUG (MainThread) [tuya] a4:c1:38:bd:76:6f:43:4c Sending Tuya Command. Paylod values [endpoint_id : 1, Status : 0, TSN: 0, Command: 0x0401, Function: 0, Data: [1, 1]]
2022-04-13 21:39:20 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Sending request header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=True, is_reply=0, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), manufacturer=4417, tsn=60, command_id=0, *is_reply=False)
2022-04-13 21:39:20 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Sending request: set_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 1]))
2022-04-13 21:39:20 DEBUG (MainThread) [bellows.ezsp.protocol] Send command sendUnicast: (<EmberOutgoingMessageType.OUTGOING_DIRECT: 0>, 0xC7AC, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY|APS_OPTION_RETRY: 320>, groupId=0, sequence=60), 61, b'\x05A\x11<\x00\x00\x00\x01\x04\x00\x01\x01')
2022-04-13 21:39:20 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 52 (sendUnicast) received: b'001b'
2022-04-13 21:39:20 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 63 (messageSentHandler) received: b'00acc7040100ef0101400100001b3d0000'
2022-04-13 21:39:20 DEBUG (MainThread) [bellows.zigbee.application] Received messageSentHandler frame with [<EmberOutgoingMessageType.OUTGOING_DIRECT: 0>, 51116, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY|APS_OPTION_RETRY: 320>, groupId=0, sequence=27), 61, <EmberStatus.SUCCESS: 0>, b'']
2022-04-13 21:39:20 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000cdf0b9acc7ffff05183c0b008302'
2022-04-13 21:39:20 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=205), 240, -71, 0xc7ac, 255, 255, b'\x18<\x0b\x00\x83']
2022-04-13 21:39:20 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Received ZCL frame: b'\x18<\x0b\x00\x83'
2022-04-13 21:39:20 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=0, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=60, command_id=11, *is_reply=True)
2022-04-13 21:39:20 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:Default_Response(command_id=0, status=<Status.UNSUP_MANUF_CLUSTER_COMMAND: 131>)

Apr 14 '22 01:04 SergeantPup

Can you see if there's any difference with this: tuya.zip

Apr 14 '22 02:04 TheJulianJES

2022-04-13 20_36_17-Greenshot Not sure if it helps but this is how the device adds with this quirk in place

Apr 14 '22 02:04 SergeantPup

Can you completely delete and re-pair the device with the quirk update I've sent a minute ago? Doubt it but maybe check if controls work.

Apr 14 '22 02:04 TheJulianJES

removed device, swapped quirk, rebooted, added device:

2022-04-13 22:16:20 DEBUG (MainThread) [homeassistant.core] Bus:Handling <Event call_service[L]: domain=cover, service=open_cover, service_data=entity_id=cover.tze200_rmymn92d_ts0601_4c436f76_window_covering>
2022-04-13 22:16:20 DEBUG (MainThread) [tuya] a4:c1:38:bd:76:6f:43:4c Sending Tuya Cluster Command.. Manufacturer is _TZE200_rmymn92d Cluster Command is 0x0000, Arguments are ()
2022-04-13 22:16:20 DEBUG (MainThread) [tuya] a4:c1:38:bd:76:6f:43:4c Sending Tuya Command. Paylod values [endpoint_id : 1, Status : 0, TSN: 0, Command: 0x0401, Function: 0, Data: [1, 0]]
2022-04-13 22:16:20 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Sending request header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=True, is_reply=0, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), manufacturer=4417, tsn=1, command_id=0, *is_reply=False)
2022-04-13 22:16:20 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Sending request: set_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 0]))
2022-04-13 22:16:20 DEBUG (MainThread) [bellows.ezsp.protocol] Send command sendUnicast: (<EmberOutgoingMessageType.OUTGOING_DIRECT: 0>, 0xC7AC, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY|APS_OPTION_RETRY: 320>, groupId=0, sequence=1), 2, b'\x05A\x11\x01\x00\x00\x00\x01\x04\x00\x01\x00')
2022-04-13 22:16:20 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 52 (sendUnicast) received: b'0060'
2022-04-13 22:16:20 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 63 (messageSentHandler) received: b'00acc7040100ef01014001000060020000'
2022-04-13 22:16:20 DEBUG (MainThread) [bellows.zigbee.application] Received messageSentHandler frame with [<EmberOutgoingMessageType.OUTGOING_DIRECT: 0>, 51116, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY|APS_OPTION_RETRY: 320>, groupId=0, sequence=96), 2, <EmberStatus.SUCCESS: 0>, b'']
2022-04-13 22:16:20 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000fbfcb9acc7ffff0518010b0083'
2022-04-13 22:16:20 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=251), 252, -71, 0xc7ac, 255, 255, b'\x18\x01\x0b\x00\x83']
2022-04-13 22:16:20 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Received ZCL frame: b'\x18\x01\x0b\x00\x83'
2022-04-13 22:16:20 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=0, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=1, command_id=11, *is_reply=True)
2022-04-13 22:16:20 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:Default_Response(command_id=0, status=<Status.UNSUP_MANUF_CLUSTER_COMMAND: 131>)
2022-04-13 22:16:20 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xC7AC:1:0x0102]: executed 'up_open' command with args: '()' kwargs: '{}' result: Default_Response(command_id=0, status=<Status.UNSUP_MANUF_CLUSTER_COMMAND: 131>)
2022-04-13 22:16:21 DEBUG (MainThread) [homeassistant.core] Bus:Handling <Event call_service[L]: domain=cover, service=stop_cover, service_data=entity_id=cover.tze200_rmymn92d_ts0601_4c436f76_window_covering>
2022-04-13 22:16:21 DEBUG (MainThread) [tuya] a4:c1:38:bd:76:6f:43:4c Sending Tuya Cluster Command.. Manufacturer is _TZE200_rmymn92d Cluster Command is 0x0002, Arguments are ()
2022-04-13 22:16:21 DEBUG (MainThread) [tuya] a4:c1:38:bd:76:6f:43:4c Sending Tuya Command. Paylod values [endpoint_id : 1, Status : 0, TSN: 0, Command: 0x0401, Function: 0, Data: [1, 1]]
2022-04-13 22:16:21 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Sending request header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=True, is_reply=0, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), manufacturer=4417, tsn=3, command_id=0, *is_reply=False)
2022-04-13 22:16:21 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Sending request: set_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 1]))
2022-04-13 22:16:21 DEBUG (MainThread) [bellows.ezsp.protocol] Send command sendUnicast: (<EmberOutgoingMessageType.OUTGOING_DIRECT: 0>, 0xC7AC, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY|APS_OPTION_RETRY: 320>, groupId=0, sequence=3), 4, b'\x05A\x11\x03\x00\x00\x00\x01\x04\x00\x01\x01')
2022-04-13 22:16:21 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 52 (sendUnicast) received: b'0061'
2022-04-13 22:16:21 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 63 (messageSentHandler) received: b'00acc7040100ef01014001000061040000'
2022-04-13 22:16:21 DEBUG (MainThread) [bellows.zigbee.application] Received messageSentHandler frame with [<EmberOutgoingMessageType.OUTGOING_DIRECT: 0>, 51116, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY|APS_OPTION_RETRY: 320>, groupId=0, sequence=97), 4, <EmberStatus.SUCCESS: 0>, b'']
2022-04-13 22:16:21 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef010100010000fcffb9acc7ffff0518030b0083'
2022-04-13 22:16:21 DEBUG (MainThread) [bellows.zigbee.application] Received incomingMessageHandler frame with [<EmberIncomingMessageType.INCOMING_UNICAST: 0>, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY: 256>, groupId=0, sequence=252), 255, -71, 0xc7ac, 255, 255, b'\x18\x03\x0b\x00\x83']
2022-04-13 22:16:21 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Received ZCL frame: b'\x18\x03\x0b\x00\x83'
2022-04-13 22:16:21 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=0, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=3, command_id=11, *is_reply=True)
2022-04-13 22:16:21 DEBUG (MainThread) [zigpy.zcl] [0xC7AC:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:Default_Response(command_id=0, status=<Status.UNSUP_MANUF_CLUSTER_COMMAND: 131>)
2022-04-13 22:16:21 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xC7AC:1:0x0102]: executed 'stop' command with args: '()' kwargs: '{}' result: Default_Response(command_id=0, status=<Status.UNSUP_MANUF_CLUSTER_COMMAND: 131>)
2022-04-13 22:16:22 DEBUG (MainThread) [bellows.ezsp.protocol] Send command nop: ()
2022-04-13 22:16:22 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 5 (nop) received: b''

Apr 14 '22 02:04 SergeantPup

I don't know why your working blinds don't log any "Sending Tuya". That would mean that this code is never called.

Please check if your logger config (or service call where you set tuya: debug) also contains this: zhaquirks: debug

Also, can you send me the device signature from both the working cover that does not output the commands and from the non-working cover that outputs the command?

Apr 14 '22 02:04 TheJulianJES

That's correct:

logger:
  default: info
  logs:
    homeassistant.core: debug
    homeassistant.components.zha: debug
    bellows.zigbee.application: debug
    bellows.ezsp: debug
    zigpy: debug
    zigpy_deconz.zigbee.application: debug
    zigpy_deconz.api: debug
    zigpy_xbee.zigbee.application: debug
    zigpy_xbee.api: debug
    zigpy_zigate: debug
    zigpy_znp: debug
    zhaquirks: debug
    tuya: debug

Apr 14 '22 02:04 SergeantPup

Zigbee device signature of controllable unit:

{
  "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress|RxOnWhenIdle|MainsPowered|FullFunctionDevice: 142>, manufacturer_code=4098, maximum_buffer_size=82, maximum_incoming_transfer_size=82, server_mask=11264, maximum_outgoing_transfer_size=82, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)",
  "endpoints": {
    "1": {
      "profile_id": 260,
      "device_type": "0x0202",
      "in_clusters": [
        "0x0000",
        "0x0004",
        "0x0005",
        "0x0102",
        "0xef00"
      ],
      "out_clusters": [
        "0x000a",
        "0x0019"
      ]
    }
  },
  "manufacturer": "_TZE200_xaabybja",
  "model": "TS0601",
  "class": "tuya.ts0601_cover.TuyaMoesCover0601"
}

Device signature of tracked but non controlled unit:

{
  "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress|RxOnWhenIdle|MainsPowered|FullFunctionDevice: 142>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)",
  "endpoints": {
    "1": {
      "profile_id": 260,
      "device_type": "0x0202",
      "in_clusters": [
        "0x0000",
        "0x0004",
        "0x0005",
        "0x0102",
        "0xef00"
      ],
      "out_clusters": [
        "0x000a",
        "0x0019"
      ]
    },
    "242": {
      "profile_id": 41440,
      "device_type": "0x0061",
      "in_clusters": [],
      "out_clusters": [
        "0x0021"
      ]
    }
  },
  "manufacturer": "_TZE200_rmymn92d",
  "model": "TS0601",
  "class": "tuya.ts0601_cover.TuyaZemismartSmartCover0601_4"
}

Apr 14 '22 02:04 SergeantPup

Having simular issue,

2022-04-20 09:30:40 DEBUG (MainThread) [zhaquirks.tuya] a4:c1:38:3a:2a:a7:0e:ee Sending Tuya Cluster Command.. Manufacturer is _TZE200_r0jdjrvi Cluster Command is 0x0001, Arguments are () 2022-04-20 09:30:40 DEBUG (MainThread) [zhaquirks.tuya] a4:c1:38:3a:2a:a7:0e:ee Sending Tuya Command. Paylod values [endpoint_id : 1, Status : 0, TSN: 0, Command: 0x0401, Function: 0, Data: [1, 2]] 2022-04-20 09:30:40 DEBUG (MainThread) [zigpy.zcl] [0x7B28:1:0xef00] Sending request header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=True, is_reply=0, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), manufacturer=4417, tsn=218, command_id=0, *is_reply=False) 2022-04-20 09:30:40 DEBUG (MainThread) [zigpy.zcl] [0x7B28:1:0xef00] Sending request: set_data(param=Command(status=0, tsn=0, command_id=1025, function=0, data=[1, 2])) 2022-04-20 09:30:40 DEBUG (MainThread) [bellows.ezsp.protocol] Send command sendUnicast: (<EmberOutgoingMessageType.OUTGOING_DIRECT: 0>, 0x7B28, EmberApsFrame(profileId=260, clusterId=61184, sourceEndpoint=1, destinationEndpoint=1, options=<EmberApsOption.APS_OPTION_ENABLE_ROUTE_DISCOVERY|APS_OPTION_RETRY: 320>, groupId=0, sequence=218), 219, b'\x05A\x11\xda\x00\x00\x00\x01\x04\x00\x01\x02') 2022-04-20 09:30:40 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 52 (sendUnicast) received: b'0058' 2022-04-20 09:30:40 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 63 (messageSentHandler) received: b'00287b040100ef01014001000058db0000' 2022-04-20 09:30:40 DEBUG (MainThread) [bellows.ezsp.protocol] Application frame 69 (incomingMessageHandler) received: b'00040100ef0101000100003174b9287bffff0518da0b0083' 2022-04-20 09:30:40 DEBUG (MainThread) [zigpy.zcl] [0x7B28:1:0xef00] Received ZCL frame: b'\x18\xda\x0b\x00\x83' 2022-04-20 09:30:40 DEBUG (MainThread) [zigpy.zcl] [0x7B28:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=0, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=218, command_id=11, *is_reply=True) 2022-04-20 09:30:40 DEBUG (MainThread) [zigpy.zcl] [0x7B28:1:0xef00] Decoded ZCL frame: TuyaManufacturerWindowCover:Default_Response(command_id=0, status=<Status.UNSUP_MANUF_CLUSTER_COMMAND: 131>)

Looking at what is send, " b'\x05A\x11\xda\x00\x00\x00\x01\x04\x00\x01\x02')" This looks to be wrong.

b'\x05A\x11\

xda == x00 == Command Word ===== should be 0x04 x0000 == Data length ===== Should be x0005 x01 == dpID x04 == Data Type x0001 == function Length x02 == Close

Any help would be appriacted

Apr 20 '22 08:04 ruudkoeyvoets

Maybe useful_TZE200_r0jdjrvi is from KKMOON. This is Tuya Spec from KKMOON. (but from a different type, so I don't know if applicable kkmoon_tuya_cover_spec.pdf )

Apr 20 '22 10:04 ruudkoeyvoets

Hello,

I've been reviewing the quirk and I have a question: 2022-04-21 11_44_02-Greenshot On the device tracking and not controlling:

    "242": {
      "profile_id": 41440,
      "device_type": "0x0061",
      "in_clusters": [],
      "out_clusters": [
        "0x0021"
      ]

But in the quirk:

            242: {
                PROFILE_ID: 41440,
                DEVICE_TYPE: 0x0061,
                INPUT_CLUSTERS: [],
                OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
            },

I can't find greenpowerproxy or "0x0021" referenced anywhere in the init.py

Does the device just not know what to do with this and that's why it's trying to make a call?

Apr 21 '22 15:04 SergeantPup

@SergeantPup The GreenPowerProxy cluster isn't modified in any way. Of course, you can try to change the replacement section from line 120-125 to:

            242: {
                PROFILE_ID: 41440,
                DEVICE_TYPE: 0x0061,
                INPUT_CLUSTERS: [],
                OUTPUT_CLUSTERS: [],
            },

And then reboot Home Assistant and re-pair the device. That way, the cluster will basically be "ignored". I doubt it'll change anything though.

For reference: https://github.com/zigpy/zigpy/blob/fa3ef729d58dd671423f29399d959b8b60c83114/zigpy/zcl/clusters/general.py#L1887-L1888 0x0021 = GreenPowerProxy.cluster_id

Apr 21 '22 16:04 TheJulianJES

I think its best keeping it in the replacement so user can see that the router have one ZGPP in the future then its being implanted functions for using ZGPP devices.

Apr 21 '22 16:04 MattWestb

zha-device-handlers
zha-device-handlers copied to clipboard

[Device Support Request] Zemismart Curtain Motor with Rail (Mains powered) (_TZE200_rmymn92d)

zha-device-handlers zha-device-handlers copied to clipboard

[Device Support Request] Zemismart Curtain Motor with Rail (Mains powered) (_TZE200_rmymn92d)

zha-device-handlers
zha-device-handlers copied to clipboard