ziatajo

Ok, so I did some more tests. It seems that the double read would work, but we had to little delay. (sorry for that failed test before) It works now...

@q-bird yes I took some more measurements, with reading every sensor twice (as it has to be now) and some Serialprinting I can reach something about 970us. So if @Molorius...

An update would really be great, I just made some further tests. I'm using now 5 full bridge load cells. So I'm always reading between Pos and Neg Pins. I...

Hi, it's me again. I'm still using the ADS1262. The last project I could ignore the "lower" measurement frequency. Now we have a new project where we would like to...

Hi evermore99, Thank you for your fast reply! What do you mean with two seperate SPI's? I only have the Eval Board connected to the ESP. I don't think something...

Thank four your answers. But I dont have a TFT screen or anything connected. Just this board: [https://wiki.analog.com/resources/eval/user-guides/circuits-from-the-lab/eval-ad7124-8-pmdz](url) to this one: [https://learn.adafruit.com/adafruit-huzzah32-esp32-feather/pinouts](url) so i'm only using one spi "communication-line", right?...

Ok, I resoldered it to my Teensy 3.2. However, it seems to be the same problem. I have around 160Hz with a Filterword of 120, but only 180Hz with a...

Hi, thank you! Any idea where to start checking? there are a lot of documents :D