ha-dualmodegeneric
ha-dualmodegeneric copied to clipboard
zacs
Generic thermostat capable of heating and cooling
Would it be possible to unset the "temperature" attribute when using dual set points? At present, my thermostat looks like this:  Ideally, would not have to deal with temperature...
### Reproduction Steps: 1. Set up thermostat with two switches, one for heat and one for cool (as expected) 2. Set thermostat to off 3. Set thermostat to within heating...
Line 770 need to use this string to avoid this problem elif (self._hvac_mode == HVAC_MODE_HEAT_COOL) and (is_comfortable or (self.hass.states.is_state(self.cooler_entity_id, STATE_ON) and too_cold) or (self.hass.states.is_state(self.heater_entity_id, STATE_ON) and too_hot)):
Hello. I'm running HA in a docker container using an nvidia Jetson Nano (arm64 arch). The new heat & cool mode (nice addition btw) is broken with HA versions **2021.6.1**...
i might be doing it wrong is there any way you can add cooler cold_tolerance /hot_tolerance heater cold_tolerance /hot_tolerance
I'm not getting this sorry. I have a 20yo ducted reverse cycle system. The relay controls are: 1. Compressor - Runs the compressor in cooling mode 2. Fan - Runs...
Some HVAC systems require that circuits be controlled independently for fan, compressor, heat pump, etc. The fan may be turned on and off together with the compressor, or the fan...
Alright, I've spent a few hours testing this both for range mode and non range mode, it looks like it works, although it feels pretty dirty. It sets the support...
Hi. It appears that the thermostat does not properly honor the min_cycle_duration directive. Below follows a minimalistic example with fake heat and cooler switches. min_cycle_duration is set to 10 seconds,...
One thing I have been missing from generic thermostats, is a fan/blower mode, that can also be tied into the main modes. In my case, for the heat mode I...