Trent Piepho

Might be related to #227 If you use GPRS instead of NB-IOT or LTE-M1, the battery needs to supply a high current and the design of the power supply doesn't...

The charger used has a minimum voltage of 4.35 V. So the input needs to be 4.35 V - 6 V in order to charge. Under 4.35 V won't break...

It should work inside just fine if near a window. Avoiding trees or being a on a roof is not necessary. @sw-dev-code, your problem may be that the SIM7070G GPS...

Keep in mind that SIM7000 is at 1.8V level, while all pins exposed on ESP32-WROVER module are 3.3 V. So you will need a level shifter to connect UART3 to...

With a level converter I was able to wire pin 50 of the SIM70x0 module to pin 33 on the ESP32. This lets me get NMEA data from the SIM70x0...

I don't know about that MacOS version. My macbook is too old to run it. But it should work. Have you checked what audio device is selected in the audio...

Signal dialog, like Audio Setup dialog, is one of the options in the main menu. Did you install --HEAD version of tg-timer using brew? Or build yourself from a source...

What git version did you build? There is an issue on portaudio for Ventura, https://github.com/PortAudio/portaudio/issues/771 but it looks like the result there is errors trying to use the audio device,...

Yes, that's what I was looking for. Just the commit 18df6de343f1e195bb9cbbe3a40c023d8b3ef277 is sufficient, everything else is knowable from that. That's an older branch, I don't think the signal dialog was...

I'd report it to the PortAudio github page. Since both tg and pyaudio use portaudio, the problem is likely there.