Arduino Core Support for Attiny 1 Series MCU

Links

• Documentation
• Tiny Core 16 Board
• Tiny Core 32 Board
• Programmer Board

Feature

Arduino Support

Installation

• Install the current upstream Arduino IDE at the 1.8.7 level or later. The current version is at the Arduino website.
• Start Arduino and open Preferences window.
• Enter https://raw.githubusercontent.com/xukangmin/TinyCore/master/avr/package/package_tinycore_index.json into Additional Board Manager URLs field. You can add multiple URLs, separating them with commas.
• Open Boards Manager from Tools > Board menu and install TinyCore platform (and don't forget to select your TinyCore board from Tools > Board menu after installation).

Programming

There are several ways to upload sketches.

Upload through TinyCore Programmer

• Select related com port number and click upload directly, same as programming Arduino Uno

Upload through Arduino Uno or similar boards

1. Connect Arduno Uno and Tiny Core boards as described here.
2. Arduin IDE->Tools->Programmer->Arduino PIN as UPDI
3. Arduin IDE->Sketch->Upload using programer

Upload through Atmel-ICE Programmer

1. Connect Atmel-ICE UPDI, VTG and GND PIN to TinyCore, supply TinyCore with external voltage, either 3.3V or 5V.
2. Make sure the green light on Atmel-ICE is on, that means target is properly powered
3. Arduin IDE->Tools->Programer->Atmel-ICE-UPDI
4. Arduin IDE->Sketch->Upload using programer

Pin Mapping

• Tiny Core 16 Pinout

• Tiny Core 32 Pinout

Please check Documentation Site for more tutorials and API