求和websocket串联的方法？？通过nginx的端口连接

[SicknUnDope]

问问题前先搜索ISSUE，并搞清楚下面的问题:

1. 检查 -key xxx 至少三遍, 保证两边一致。
2. 保证-nocomp, -datashard, -parityshard, -key, -crypt, -smuxver两边一致。
3. 是否在服务器端，正确设定了转发的目标服务器地址 --target。
4. 是否在客户端，正确的连接到了 client的监听端口。
5. 如果第3条不确定，尝试在服务器上telnet target port试试。
6. 防火墙是否关闭了UDP通信，或者设置了UDP的最大发包速率？
7. 两端的版本是否一致？
8. 是不是最新版本？
9. 两端分别是什么操作系统？
10. 两端的输出日志是什么？

Before firing issue, make sure you figured out the following common questions.

PLEASE DO SEARCH FIRST.

1. Check your -key xxx for at least 3 times, MAKE SURE both sides share the same secret.
2. -nocomp, -datashard, -parityshard, -key, -crypt, -smuxver must be the same on both side.
3. Did you correctly set the -target on the server side?
4. Did you correctly connected to the listening port on client side?
5. MAKE SURE telnet target port on your server successful(don't ask me why couldn't).
6. Does your firewall allows UDP communications? (including your ISP Cable-Modem)
7. Are you using the same version for both client & server
8. Are you using the latest release?
9. Which OS do you use?
10. Which end for this issue related to, client or server?

[SicknUnDope]

类似ss需要用到插件来实现。不知道kcptun是否也需要插件？

[SicknUnDope]

还有就是为什么加了udp2raw反而断流非常非常的严重。

[SicknUnDope]

.<

[SicknUnDope]

没错我又来了。。没有ws没有安全感

[SicknUnDope]

现在都没人么。

[SicknUnDope]

自闭了

[SicknUnDope]

hello

[NaughtDZ]

vultr 棒子和嘚国各一个服路过，稳定使用快两年了，是ss+KCP。目前来看你纯自用不会被封锁，没得必要再套别的东西了。至于udp2raw，据说已经有被探测的可能性了，该被Qos还是得被限制，不如客户端加个-autoexpire 60简单粗暴点