xhycode

Hello prueker Your suggestion is a good one and I will provide it to our product manager. You can insert G53 in the gcode file to print using the machine...

Thank you very much for your suggestion, this issue has been added to our requirement pool, and this feature will be added subsequently

Hi zk100005, The code is in [Snapmaker2-Controller/snapmaker/src/module/linear.cpp](https://github.com/Snapmaker/Snapmaker2-Controller/blob/ee368b40949e334bd354314fd33356bfd7df1117/snapmaker/src/module/linear.cpp#L398) assignment of A350 length Can you tell us why you need to connect the A150 hot bed to the A350?

X_DEF_SIZE is the size of the heat bed, used for leveling, you can see the grid size on the heat bed. X_MAX_POS is the travel size of the axis

Change the SHORT_BUILD_VERSION version number in Version.h after each modification, the same version number controller will not be updated

Hi brvdboss The [V4.4.11 tag](https://github.com/Snapmaker/Snapmaker2-Controller/releases/tag/v4.4.11) has been updated

Thank you for your suggestion, it is a very good suggestion. Since the heating of the module is controlled by ourselves, we did not optimize the controller to set the...

Thank you for your suggestion, we have understood your need, now you can use M2000 S0 to query the current line number after manually pausing. Check the "Last st line:"...

Hi, sorry for the inconvenience this issue may have caused. Please contact our support at [email protected], our support team will help you make more troubleshooting and solve the problem.

I'm sorry for not reproducing the problem you described, I noticed that the SM2 hot bed is not used, will this problem still occur if the SM2 hot bed is...