xhycode

Hi scyto , I'm sorry for your trouble, thank you for your reminder, I will update the list of supported gcode as soon as possible and disable the G29 function...

Thank you very much for your suggestion, this issue has been added to our requirement pool.

Hi Kaelum. Sorry for the late reply. Z offset is stored and this value will be calibrated once at home and will not add up. This is done so that...

I'm sorry I can't reproduce the problem you described, if your problem still exists, you can contact our technical support at [email protected] to solve it

Hi smhoover, Sorry for the confusion caused by our documentation not being up to date, snapmaker2.0 do not support M0/M1 commands. Can you tell me what you need to do...

Hi smhoover. If it is 3D printing you can use M600 pause, I'm sorry that currently the laser and CNC do not support the command on GCODE pause. Have communicated...

Work is controlled by the screen, the current controller can not directly pause the screen work, we will add a new protocol to support this feature

Please help us get the Booting log for a further check. On the Console panel, input M1999 and press Enter. Then the machine will reboot and the Booting log will...

No more problems from the boot message. Is it possible that the machine works normally after rebooting? M92 parameters default is X400 Y400 Z400, but your machine axis is X160...

Yes, this change will be included in upcoming releases