Compatibility with new h-encore

[masoudr]

Hi, As you might know, the new h-encore hack released for 3.65 to 3.68. It is very important to me that if it still works with the new exploit or not. Can anyone confirm that it works or not? Thanks.

[rigaz29]

up

[xerpi]

The thing is that there are some parts of ds4vita which are quite hacky and require patching specific offsets of SceBt (Vita OS module responsible for Bluetooth communcations). If between FW updates Sony changes SceBt, then the offset I need to patch will change, and since my Vitas are on 3.60 and I don't plan to upgrade, I would need someone to send me a 3.68 dump of SceBt so I can find the offsets specific for that FW.

[ness151]

Do you need a dump of that file from a system that has shipped on that firmware, or one that upgraded to it? If the latter, I can provide that file for you. If the former, I believe there may be a module floating around on reddit.

[xerpi]

I'd need the dumped SceBt from running https://github.com/St4rk/vitadump

[akiba01]

xerpi thanks a lot for your work. I cant wait for an update (if possible)

[StarrHD]

Same

[akiba01]

Hey xerpi, did anyone provide you the dumped SceBt ?

[akiba01]

Opened a thread here, maybe someone is willing to dump his 3.68 https://www.reddit.com/r/vitahacks/comments/8wshk8/whit_hencore_ds4vita_stopped_working_the_dev/

[masoudr]

Please consider other firmware like 3.65 too.

[CloudStrife1901]

Works fine for me on 3.68 h-encore? So what's the problem?

[akiba01]

Ps vita 1000 pch1004, 3.68 h-encore.

*KERNEL ur0:tai/ds4vita.skprx

Tested whit v1 ds4 and v2 ds4 (IF v1 means that it doesnt have the added lightbar, and v2 has it)

Tested whit ds4vita 1.1 and 1.2

I always get this error:

"Could not find a profile supported by this system"

Bluetooth is active, and i can see both controller listed.

Any other plugin works. If you say that it works, the problem is on my end. I have no clue how to fix it tou

edit:

Also tested whit autoplugin, ds4vita.skprx and the line in .cfg both go into ur0:tai. Still not working

Maybe both my controller are v2 and both not supported?

[akiba01]

Ok i found the issue.

tai folder ur0 sd2vita ux0 mc uma0

I had a config.txt in uma0 from some reason, removed that now it loads from ur0. Works finally!

[masoudr]

@akiba01 @CloudStrife1901 I haven't tested it but I heard that people saying it has some problem with the joysticks and can't get it working properly. Did you notice any issues with controlling in games? It is very important that ds4vita must offer the same experience as the original controller.

[CFarrant]

@xerpi If you can link me a compiled version of the Dumper, I can update to 3.68 from 3.67 since I already lost Enso compatibility a long time ago. I would be more than happy to get a dump of the SceBt module for you.

[CloudStrife1901]

@masoudr no problems my end with the analogue sticks. Tested and working on the games I've got installed 👍

[CFarrant]

Can confirm that it works, and got it working.

[reversefold]

Not able to get this working on my PCH1101 on firmware 3.65 with h-encore and enso. Plugin is in tai folder with the config.txt. Trying to connect I get an error about there being no supported profile.