Isik

Added v0.1 Revo Micro mount. Was tested by me & other beta testers during the beta.

Yay!

I'm a GitHub noob still. Took me a while to figure out how to delete an old repo and fork again for new PRs (which is why there are this...

Just follow these instructions: https://github.com/xbst/KUSBA/blob/main/Docs/v2-Rampon-Firmware.md#1-flash-rampon-anchor-to-the-mcu You can flash the firmware on a Windows PC, it's easier.

There's no one "factory" for KUSBAs. I open sourced the files so there are many vendors, and each vendor orders from their preferred supplier. Some even make them themselves. Either...

I test all of my KUSBAs as this is a problem affecting a decent chunk of KUSBAs, depends on the batch but I see somewhere between 2-8% failure rate (usually...

Yeah I thought the problem was fixed with v2.3 as all the units I ordered for the prototype run were working fine. I wasn't selling these back then so I...

If it's happening EVERY TIME, then yes there's a hardware issue. The issue I was referring to is a known Klipper bug on RP2040 based USB accelerometers. This happens on...

https://github.com/xbst/KUSBA/blob/main/Docs/v2-Rampon-Firmware.md ________________________________ From: rastosk ***@***.***> Sent: Saturday, December 2, 2023 11:04:19 AM To: xbst/KUSBA ***@***.***> Cc: Isik ***@***.***>; Comment ***@***.***> Subject: Re: [xbst/KUSBA] Kusba 2.4 instalation process (Issue #27) Oh...

> I just received a KUSBA from local reseller DREMC . I have run into the issue of the firmware not sticking and erasing on a power cycle, like it...