Tiny-Doom

A modified high temp Tiny-M (based on Voron Zero) build.



Initial CAD design description: https://youtu.be/QfLSvSASgaw
More information about Tiny-M: https://github.com/gsl12/Tiny-M
More information about Voron v0: https://github.com/VoronDesign/Voron-0

This build is still WIP. All files are released to help you build a similar machine or draw inspiration from. I don't promise that everything will work. Build at your own risk. Also, be careful with high chamber temps. I'm not responsible if something bad happens.

Front CS	Side CS

Progress:

• Built the frame.
• Tested the printed parts. (Used ABS for testing, final parts will be CF-PPA.)
• Some STL and DXF changes. (Some parts on the CAD model weren't perfectly aligned.)
• Electronics, wiring done. Time to test.

Future Plans:

• Test the printer, fix parts, rinse & repeat.
• Seal the filament drawer so the potentialy hygroscopic filament doesn't absorb mositure. (Will require new panels.)
• Fix the air hole on the rear gantry belt path to insulate better.
• Larger door with better visibility. (Also needed for the sealed filament drawer.)
• Top mounted Chamber Heater + Air Filter unit.
• Lighting
• Webcam mount behind double PC. (Chamber temps won't be safe for the webcam.)

Check out my YT channel to see this build in progress

If you wish to support the development of this project, you can support me on Patreon, YouTube (Membership) or on Paypal.