I need the Solidworks macro to perform/run 14 exact tasks

[allenloo57]

Okay,

I need the Solidworks macro to perform/run 14 exact tasks listed below on:

(A) The whole Assembly

(B) The exploded view of the whole assembly where each part automatically spaces itself apart from each other yet close enough not to make it stretched out too wide on the screen. With a pause at the beginning so that you can hide any unwanted components in the exploded views

(C) Each individual part in that Assembly

Those tasks to be performed are:

(1) Ctrl 1 Front View Create an (Alt+Spacebar) Snap shot of the Graphic Area, with the part centered on the screen as large as possible

(2) Ctrl 2 Back View Create an (Alt+Spacebar) Snap shot of the Graphic Area, with the part centered on the screen as large as possible

(3) Ctrl 3 Left View Create an (Alt+Spacebar) Snap shot of the Graphic Area, with the part centered on the screen as large as possible

(4) Ctrl 4 Right View Create an (Alt+Spacebar) Snap shot of the Graphic Area, with the part centered on the screen as large as possible

(5) Ctrl 5 Top View Create an (Alt+Spacebar) Snap shot of the Graphic Area, with the part centered on the screen as large as possible

(6) Ctrl 6 Bottom View Create an (Alt+Spacebar) Snap shot of the Graphic Area, with the part centered on the screen as large as possible

(7) Ctrl 7 ISO 1 Create an (Alt+Spacebar) Snap shot of the Graphic Area, with the part centered on the screen as large as possible

Then: Press space bar to bring up the Orientation Box:

Then select the 4 top Isometric View and the 4 lower Isometric views:

(8) ISO 2 Create an (Alt+Spacebar) Snap shot of the Graphic Area, with the part centered on the screen as large as possible

(9) ISO 3 Create an (Alt+Spacebar) Snap shot of the Graphic Area, with the part centered on the screen as large as possible

(10) ISO 4 Create an (Alt+Spacebar) Snap shot of the Graphic Area, with the part centered on the screen as large as possible

(11) ISO 5 Create an (Alt+Spacebar) Snap shot of the Graphic Area, with the part centered on the screen as large as possible

(12) ISO 6 Create an (Alt+Spacebar) Snap shot of the Graphic Area, with the part centered on the screen as large as possible

(13) ISO 6 Create an (Alt+Spacebar) Snap shot of the Graphic Area, with the part centered on the screen as large as possible

(14) ISO 8 Create an (Alt+Spacebar) Snap shot of the Graphic Area, with the part centered on the screen as large as possible

The result should be that I have 42 Snap shots to appear under the “Scene, Lights and Camera” tab.