Uefitool output not allowing post, mmtool missing PciBus filename

[AbdullahMPrograms]

System

• Motherboard: T7920 Proprietary
• BIOS Version: 2.42.0
• GPU: RTX 3080
• [X] CSM is turned off. Make sure to confirm this in the BIOS and not with GPU-Z or similar since it can be inaccurate
• [X] 4G decoding is enabled. Make sure to confirm this in the BIOS and not with GPU-Z or similar since it can be inaccurate
• [ ] UEFIPatch is applied (see Using UEFIPatch for more information). On some motherboards DSDT Patching is also needed
• [X] I have read Common issues (and fixes)

Description I'm currently trying to use uefitool to add the rebardxe driver to my dumped stock T7920 bios (dumped via ch341, have verified this bios works by itself). When using uefitool to add the rebardxe driver, the T7920 will not post, instead it displays a bios recovery "please flash your bios" light code. Removing the rebardxe driver from the modified bios via uefitool (essentially reverting it to stock) and flashing that also gives the same issue, this leads me to believe the issue is caused by uefitool. I've tried using mmtool, but it seems I am missing the "PciBus" filename (or any filename actually), thus I am unable to proceed. Uefipatch was not used as there were no patches to apply and dsdt patching is not needed. Any suggestions would be appreciated.

Image of mmtool output: