xC0000005
Cannot get Maylan LCD to work with SKR 1.4 turbo
Description
While I was able to run the LCD display on an e3 mini board, after swapping the board I'm not able to use the Maylan lcd. I've connected the tx/rx pin od the screen to the TFT tx/rx (tried swapping many times), I configuration I set: #define SERIAL_PORT 0 #define SERIAL_PORT_2 -1
and of course enabled MAYLAN_LCD... tried to set different serial in code extra_maylan.cpp (from 1 to 3) but the display is not communicating with the printer
Steps to Reproduce
connect the maylan lcd display to skr 1.4 tot tx/rx
Expected behavior:
the display should works
Actual behavior:
the display doesn't work
I'm leaving the issue here because I know that you've written the module from communicating with the display...