Charles Blackburn
Charles Blackburn
if you enable mavlink on the VCP port i'm not 100% that works in inav. I know if you enable it and MSP on a normal uart, then it's msp...
if that's the case then you cant have mavinik on the usb side, as i've stated before, when you arm, MSP will not become available and currently afaik, the only...
llike i said before, you would have to be armed for mavlink to come out of that port, now whether the usb port gets closed and re opened i don't...
what flight controller is it ??? F411WSE ? btw, I2C doesnt apply here On Tue, 5 Oct 2021 at 08:27, FellowWroclaw ***@***.***> wrote: > llike i said before, you would...
ahh that makes sense. is it a fixed wing or a multirotor? if it's a fixed wing then you don't need the compass anyway, in fact it is not encouraged...
reproduced the ground side rPi section here: ``` # >>>>>>>>>>[TELEMETRY WBC/OTHER]-- # wbc = use wifibroadcast as telemetry up/downlink # external = use external means as telemetry up/downlink (LRS or...
note.... according to the wiki, this can be done: https://github.com/OpenHD/Open.HD/wiki/Software-~-Advanced-~-Telemetry-&-OSD `If you have some other means of transmitting the telemetry to the ground (e.g. an LRS with serial downlink or...
has this been looked into yet? *nudge nudge wink wink*
Any news ??
> Yes this is implemented, you can connect whatever you want to the uart or usb serial on each side and the messages will reach the OSD I still can't...