WYF

嗯嗯，感谢提醒！那个规范我也有在关注，之前甚至是学院和学校的规范都不同。 目前那一份README中提到的规范是没有问题的，之后我会去跟进学院/学校方面的意见~

👌猴，之后争取在弄好一个确定符合格式的版本之后和其他学院的同学沟通一下看看能不能满足要求

@DesmonDay 主要是官网的研究生毕设规范写得不清不楚，我自己暂时不了解研究生的版本有什么额外的要求，然后身边的同学也有点迷。如果你了解的话可以直接与我联络，可以邮件发我联系方式？（直接发wx号过来也可？）

我晚点review下再看看怎么merge到主线

Thanks for your quick reply! It sounds like this issue can not be easily fixed by finding some key parameters in the document. emmmmm... I also have no idea right...

I can't boot this image since this server is in the locked server room. But there is another server using kernel `5.10.78` with the same hardware. Let me try that...

``` $ ./corefreq-cli -B -k -M [ 0] Dell Inc. [ 1] 2.5.4 [ 2] 01/13/2020 [ 3] Dell Inc. [ 4] PowerEdge R740 [ 5] [ 6] 4---D-- [...

I should run the command `lspci -nn` ? ``` $ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Sky Lake-E DMI3 Registers [8086:2020] (rev 07) 00:04.0 System peripheral [0880]: Intel...

Got it, I will give it a try.

This module is already loaded, and I find the log you want. ``` $ lsmod | grep edac skx_edac 24576 0 nfit 77824 2 skx_edac $ dmesg | grep -C...