workingmanrob

Seriously though - @mdegat01 thanks for looking at this. Very glad to hear I'm not the only lunatic running a setup like this though @Traviis :beers: gooooo diskless!! :zany_face:

Ya that looks like around where mine crapped out too.. `device (eth0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')` I just have to enjoy the "I'm changing this...

Well that change very nearly ruined my Saturday. Thank goodness for the USB NIC... bacon saver for sure. There is one other minor mod I have made - not sure...

> On startup of supervisor it does actually post an update to your network interface. It essentially just posts the exact same values you already have back again. The reason...

``` $ /sbin/ifconfig eth0:0 eth0:0: flags=4163 mtu 1500 inet 192.169.99.41 netmask 255.255.255.0 broadcast 192.169.99.255 ether dc:a6:32:c3:b5:19 txqueuelen 1000 (Ethernet) ``` was checking to see if the supervisor had started.. ```...

No joy - Network Manager does not want to let me have an eth0:0 at all.

I will fire up my backup machine and update it to latest and greatest to see if this issue still exists. AFAIK it does. That would be my comment :+1:

@nielsnl68 not great.. compiles but boot loops with: [E][display:022]: Could not allocate buffer for display! minor changes to my working yaml - commented out led_pin and changed the display type...

This is what I am using with the PR from MasterTim17.. ``` external_components: - source: github://pr#1523 components: - display - ili9486 ``` and the display component ``` display: - platform:...

I am currently using an ili9486 based controller with an esp32 using a closed PR from MasterTim17. https://github.com/esphome/esphome/pull/1523 Not sure if this helps at all but it does work just...