Some BOM issues i found while sourcing parts

[casartar]

Starfish BOM issues:

• C203, C1411, C1511, C1611 Capacitor 865080653016 seems to be too big for the footprint | suggestion: same as C5, C22 on Jellyfish EEE-TQV101XAP
• D401 - D404 different mpn, some for 5V instead of 3V3 | suggestion: should all be the same PESD3V3U1UA,115
• F201 fuse should be part of the schematic so it is included in the BOM | no suggestion: forgot to buy one :(
• J407 mpn is missing | suggestion: USB1030-GF-P-B-B
• R202, R1003, R1103, R1303, R1703 footprint is 0402 mpn is for 0603 | suggestion: AC0402FR-075K1L
• R403, R404 mpn missing | suggestion: same as R203
• SW301, SW302 mpn missing | suggestion: TS20-42-25-WT-160-SMT-TR
• U601, U701 pressure range missing

Jellyfish BOM issues:

• C1-C3 mpn missing | suggestion: C2012X7R1V475K125AE
• FB1-FB14 Value says 50 Ohm at 100 MHz but the Datasheet of the mpn says 120 Ohm and there are different ratings some 2A some 3A
• R3, R16 value is 100 mpn is for 10k | suggestion: AC0402JR-07100RL
• R18, R19, R21, R22, R24, R25 value is 220m but mpn is for 240m and it is different to starfish - i tried to understand this from the datasheed but didn't :|
• R1, R2, R15, R26, R27 value is 5k1 mpn is for 10k | suggestion: same as in starfish AC0402FR-075K1L
• R10, R28 mpn is missing | suggestion: RC0603JR-7W1KL

Jellyfish-Tailboard BOM issues:

• C1-C3 mpn missing | suggestion: EMZR500ARA101MF80G
• R1, R2, R3 value typo and footprint is 0402 but mpn is for 0603 | suggestion: AC0402FR-075K1L

[atanisoft]

rs485-feeder-adapter:

• R102 footprint is 0402 but mpn is for 0603 | suggestion: AC0402FR-075K1L