Capt. Jack

> Yes I think so. I tried it and did `systemctl stop snap.fwupd.fwupd` but still get-devices shows No Vendor ID set. I put it here: `/root/snap/fwupd/current/var/lib/fwupd/quirks.d/modem-manager.quirk ` and `/root/snap/fwupd/current/var/lib/fwupd/plugins/modem-manager/modem-manager.quirk`

hmm...still not seeing much with `journalctl -u fwupd.service -b` I did set the verbose to * ``` # /snap/bin/fwupdmgr modify-config VerboseDomains * Restart the daemon to make the change effective?...

``` cat /root/snap/fwupd/2164/etc/fwupd/daemon.conf [fwupd] # Allow blacklisting specific devices by their GUID # Uses semicolons as delimiter BlacklistDevices= # Allow blacklisting specific plugins # Uses semicolons as delimiter BlacklistPlugins=test;invalid #...

Let me try it on the latest ubuntu

Actually, if I right-click on a file, "Set Location" isn't showing in the contextual menu.

Having same type of symptoms

If this tools is updating the /etc/exports file, it would be something like: `/export/Music 192.168.90.1/24(fsid=3,ro,fsid=3,no_subtree_check,secure,all_squash) ` where 192.168.90.1/24 is for the whole subnet.

@MrChromebox - is there a built-in firmware way of doing this now or do I still need to bridge that pin to ground? I'm on Kuldax and facing the same...

@namezys - thanks. Do you know if just masking off the CLK REQ pin with plastic tape would work? I had done this with an HBA storage card a while...

> Oops. You can’t masked off this pin, it must be pull down to ground. Yep, masked it and still it didn't show up :-) OK, trying with what conductive...