whc2001

Good news, the LAN8720A module works perfectly; Bad news, now I'm not even sure where is the problem ;) I don't know where it stucks, I'll try some debug print...

> Which board are you using? I am using a generic ESP32-WROVER dev module (I didn't enable PSRAM for now because seems like it creates more problems) and a WaveShare...

> Did you try using wifi to test if it works that way? If I use WiFi seems like the connection can be made, but it looks very unstable. I...

Firstly really sorry for taking your time, it turns out I was a total idiot. The following two images speak themselves.   I was gonna to wire up the...

[Clock enable GPIO is added to the menuconfig](https://github.com/whc2001/snapclient/commit/08b96b3ccefafee9ae77600af137b10499eb3551). Also I've added the [functionality to opt for static IP instead of DHCP](https://github.com/whc2001/snapclient/commit/c39429c3d16878ec16815eb3b9e49cf431f1c58e) (although it would make more sense to configure a...

> As you can only output RMII clock using GPIO0 through APLL you will be restricted to DACs which do not require MCLK or you'll have to choose a LAN8720...

> Should work if it goes to HIGH Z then After checking the datasheet of ESP32 and LAN8720, I just realized I did it wrong and you have used an...

Actually is the auto repeat feature even working for you? I remember on Vanced this feature worked flawlessly and with shortcut button on video OSD, but with ReVanced this feature...

After reinstalling the Magisk module seems like it's working. However I totally agree that a button on the OSD would be very convenient since the repeat status is not retained...

That bar is in the actual home page not in the old feed page, so I think it might be off-topic to implement it in this script. However you can...