Cannot find module '/app/wgpw'

[SonnieP]

Per the instructions I tried to create a bcrpyt hash password... trying that command gives me the following error:

[root@host sonnie]# docker run ghcr.io/wg-easy/wg-easy wgpw (I entered my password here) docker run ghcr.io/wg-easy/wg-easy wgpw (my password was shown here) node:internal/modules/cjs/loader:1148 throw err; ^

Error: Cannot find module '/app/wgpw' at Module._resolveFilename (node:internal/modules/cjs/loader:1145:15) at Module._load (node:internal/modules/cjs/loader:986:27) at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_ma in:174:12) at node:internal/main/run_main_module:28:49 { code: 'MODULE_NOT_FOUND', requireStack: [] }

Node.js v20.15.1 [root@host sonnie]#

Any ideas?

[eandersons]

That is because you are using image tag that does not have (yet) this functionality. Try nightly.

[SonnieP]

I'm not following... where do I insert "nightly," and how does that fix the module not found issue? Thanks!

[eandersons]

docker run ghcr.io/wg-easy/wg-easy:nightly wgpw

If tag is not specified, latest is implied, and currently the latest tag does not yet have the functionality you are trying to use.

[SonnieP]

I got the hash password and copied it to my docker-compose.yml file, but after saving and attempting to login to the UI, I still get unauthorized.

Any further recommendations? I've been fighting with this for over a day. I'm not finding anything easy about WG Easy at this point (no offense to anyone).

[eandersons]

Did you run container with the image of same tag? Did you run container with docker run or with Compose file?

I suspect that the culprit is that the password hash contains $. See #1181 or #1191 depending on how are you running WireGuard Easy container for a solution.

Confusion comes from the fact that the branch master is not the production branch, therefore information that can be found on https://github.com/wg-easy/wg-easy might not reflect what is available on production images.

[SonnieP]

I ran the command: docker compose up -d && docker compose logs -f

I have the single quote around my hash password and I have cleared cache on my browser. I still get unauthorized.

I think it's about time I give up on this... not worth two days of my time. I suppose I'll install Wireguard thru my Omada Controller. I thought maybe this would be easier and better, but it has wasted a vast amount of my time and is anything by easy. I never seen a program have so many issues. Truly remarkable that anyone is using it.

[mcmimik]

@eandersons There is a typo in your comment (h should be before the t).

In case someone else on the Internet comes across this issue and wants to quickly copy the command into their console:

docker run ghcr.io/wg-easy/wg-easy:nightly wgpw YOUR_PASSWORD

[empwilli]

Thanks for your work and suggestions. I came here after I figured it out by toying around with the different versions. Do you plan to release the nightly docker container as production soon? Otherwise I'd suggest to add some info into the readme that nightly is necessary :).

[pheiduck]

@empwilli its on pipeline: https://github.com/wg-easy/wg-easy/pull/1199

[offizium-berndstorath]

nightly isnt needed. just dont try to use the hash password and wait for the official release

[SonnieP]

I give up on it… too much to comprehend for this hillbilly.

I’m using Tailscale and it is serving my purpose.

Regards,

Sonnie

From: Bernd Storath @.> Sent: Thursday, August 1, 2024 5:38 AM To: wg-easy/wg-easy @.> Cc: SonnieP @.>; Author @.> Subject: Re: [wg-easy/wg-easy] Cannot find module '/app/wgpw' (Issue #1197)

nightly isnt needed. just dont try to use the hash password and wait for the official release

— Reply to this email directly, view it on GitHub https://github.com/wg-easy/wg-easy/issues/1197#issuecomment-2262715226 , or unsubscribe https://github.com/notifications/unsubscribe-auth/ARI5O76MH2LNYMZEGC3L6GTZPIFZ3AVCNFSM6AAAAABLDDKWDSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENRSG4YTKMRSGY . You are receiving this because you authored the thread. https://github.com/notifications/beacon/ARI5O74PYHJFQCO6K5SPB5DZPIFZ3A5CNFSM6AAAAABLDDKWDSWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTUG3ZFVU.gif Message ID: @.*** @.***> >

[offizium-berndstorath]

just read the readme in the production branch and everything will work

[spagettikod]

Just installed wg-easy for the first time and I love it. But I must say that it's quite confusing that the master branch, which is the default page for the project, show documentation that belong to the nightly release and not the current production release.

Using separate feature/version branches and keeping master for latest production would make it easier for new users to get on board.

[offizium-berndstorath]

master is default as pr should be made against it. (making production default wouldn't make sense). also this is common practice.

[ThunderThorr]

hello tried using docker run ghcr.io/wg-easy/wg-easy:nightly wgpw TEST123 and when i go to my panel it stays on a loop loading and never enter to the panel,

my config is

docker run -d
--name=wg-easy
-e LANG=en
-e WG_HOST=1.125.5.25
-e PASSWORD_HASH='$2a$12$7tpLWwoiHUPQT0OxuBDike23WBYsZ1cZjaS6p0Xe8AiF1R1kGXdas'
-e PORT=51821
-e WG_PORT=51820
-v ~/.wg-easy:/etc/wireguard
-p 51820:51820/udp
-p 51821:51821/tcp
--cap-add=NET_ADMIN
--cap-add=SYS_MODULE
--sysctl="net.ipv4.conf.all.src_valid_mark=1"
--sysctl="net.ipv4.ip_forward=1"
--restart unless-stopped
ghcr.io/wg-easy/wg-easy:nightly

also in the chrome console appears some error about some "restoreconfig" error on vue js, i did rollback to latest stable release (without password lock) and is working correctly actually, waiting for being fixed the password issue, i repeat the error now is not "unauthorized" but it is that does not display the modal but it shows the loading animation like as validating the password as is recognized as authorized (tried putting 1 as password) and said unauthorized so looks like validation is working but when it goes to inside the panel to access , it stay a ethernity in the loading animation and does nothing and appears the restoreconfig error on chrome console

[offizium-berndstorath]

Please paste the error from the console in here

[meddion]

I get the same error as @ThunderThorr in my console along with the hanging loading screen when using Brave Browser 1.68.134 Chromium: 127.0.6533.88 (Official Build) (arm64) (Safari is fine though):

ReferenceError: restoreConfig is not defined
    at Er.eval (eval at mc (vue.min.js:6:105188), <anonymous>:3:6811)
    at t._render (vue.min.js:6:45862)
    at Er.r (vue.min.js:6:79765)
    at t.get (vue.min.js:6:28262)
    at t.run (vue.min.js:6:28995)
    at cn (vue.min.js:6:19867)
    at Array.<anonymous> (vue.min.js:6:23307)
    at Sn (vue.min.js:6:22707)

I am getting this error on both the nightly (nightly@sha256:b6a799f9d96d735e07d300863bd43d32d7e9f4514bb8e7ed88157c22891f4f3b) ~~and the latest (latest@sha256:4c2c591498aa910ce86a90fa00c4714ffd78dd7556b1f488f226471b97346bc6)~~ - it's been the cache issue.

My docker-compose.yml:

services:
  wg-easy:
    environment:
      - LANG=en
      - WG_HOST=<MY_HOST>
      - WG_DEVICE=<MY_DEVICE>
      - WEBUI_HOST=0.0.0.0
      - PASSWORD=<PASSWORD> # OR PASSWORD_HASH for nightly
    image: ghcr.io/wg-easy/wg-easy:<IMAGE_TAG>
    container_name: wg-easy
    volumes:
      - /etc/wireguard:/etc/wireguard
    ports:
      - "51820:51820/udp"
      - "51821:51821/tcp"
    restart: unless-stopped
    cap_add:
      - NET_ADMIN
      - SYS_MODULE
      # - NET_RAW # ⚠️   Uncomment if using Podman
    sysctls:
      - net.ipv4.ip_forward=1
      - net.ipv4.conf.all.src_valid_mark=1

[offizium-berndstorath]

@meddion @ThunderThorr please use #1253

[meddion]

@offizium-berndstorath thank you, sir. I made a correction in my last comment -- the issue doesn't pop up on the latest.