CC3D-CableCam-Controller icon indicating copy to clipboard operation
CC3D-CableCam-Controller copied to clipboard

Published 20 hours ago • verified publisher icon wernerdaehn

Buzzer for end points.

Open DmitriySurin opened this issue 7 years ago • 4 comments

Is it possible to use buzzer outputs of the flip board as the confirmation of setting the endpoints? One beep for the first and two beeps for the second endpoint? Also it be useful to dyplicate onboard mode light via led strip output.

DmitriySurin avatar Sep 11 '18 18:09 DmitriySurin

Any idea?)

DmitriySurin avatar Sep 21 '18 17:09 DmitriySurin

Implementation is probably simple. Need to find a spare GPIO pin, PWM output and we are good. But is it worth it? You would need to attach a buzzer. For this one use case. Often you want to be as quite as possible. and you get the same output if you would use a bluetooth connection plus more.

What would be your arguments offsetting this?

wernerdaehn avatar Sep 22 '18 15:09 wernerdaehn

The arguments is very strong...Carrying a 30 000 USD camera onboard I want be for 100 sure thats my endpoints are set propertly by any reason. Any operation should have the feedback from the device. Flip board have separate buzzer outs.

DmitriySurin avatar Sep 22 '18 19:09 DmitriySurin

That's an argument for getting feedback. But not if bluetooth or buzzer, is it? Yes, the pins are not used at the moment.

wernerdaehn avatar Sep 23 '18 10:09 wernerdaehn