glow-sans
glow-sans copied to clipboard
welai
[demo] feet removal not working when contrast < 0.87
it seems to be base font weight dependent. in ExtLight weight, it happens when contrast < 0.77
This is a known issue, probably a problem with stroke width estimation. The feet removal algorithm fails when meeting extreme parameters. Perhaps this will not be fixed, since the extreme cases usually look bad. But the feet removal method will be improved in the next version anyway.
At least feet removal works well for Glow Sans Thin Compressed (180):
You may check out if your contrast setting is too high or low.
Demo Link
也是去脚问题：
目前中国这样口居中的字去脚效果可以，左右结构里口偏上的明湖看起来也可以，但遇到口垫底的字排版起来效果就……显得相对同一行的其它字飘起来了。这一类字Demo里没有希望添加：名容兽音（整体飘起）飴（右边飞升）我暂时只测试出这几字，怀疑是普遍现象。
可以用“包括作者姓名与内容特征”这句测试，可以发现“名容”浮起一点。
Demo Link
也是去脚问题： 目前
中国这样口居中的字去脚效果可以，左右结构里口偏上的明湖看起来也可以，但遇到口垫底的字排版起来效果就……显得相对同一行的其它字飘起来了。这一类字Demo里没有希望添加：名容兽音（整体飘起）飴（右边飞升）我暂时只测试出这几字，怀疑是普遍现象。可以用“包括作者姓名与内容特征”这句测试，可以发现“名容”浮起一点。
目前已经下降1/4脚高作为补偿了，做到完美是很难的。
目前已经下降1/4脚高作为补偿了，做到完美是很难的。
我模拟效果，可能凡是原位于最底的口，底横直接顶到与原脚底平齐似乎可以？如果Demo能提供脚高变量，我可以测试出相对较好的参数。
in 0.91, 嘒 and 嘔 are still have feet in main components, feet in radicals are removed though. (noticed in GlowSansJ-Normal-Regular.otf)
Feet removal is hard to make perfect. At present time, 匚 & 匸 in TC/J do not feature the feet removal, since the removal may also affect 非 components. I will look into this later.