direwolf

direwolf copied to clipboard

Dev

1

Updated dw-start.sh script with various improvements

dranch

Add Github action for x86_64 Linux build

2

It will trigger a build every time you push code. It should be easy to add support for macOS and Windows later.

ew1abz

[Windows 10] Config file line 202: PTT with RIG is only available when hamlib support is enabled.

3

I have Hamrig 1.3 installed, and the DW Binary 1.4. I get the error "Config file line 202: PTT with RIG is only available when hamlib support is enabled.". I...

VK3FNG

aborted connects via agwpe port don't abort

2

Hello, When connecting to a station, then having 2nd thoughts and disconnecting (sending 'd' before the remote station has responded) dw (direwolf) continues to attempt connections until it reaches the...

pe1rrr

Use case. A channel has traffic on 2 or more baud rates, e.g. MODEM 1200 and MODEM 9600 baud. We currently can configure CHANNEL using the same audio i/o (with...

johnhays

Suggestion: Move Recommended Install Method to a Package Manager

2

I've been using Direwolf as my software TNC for a while now, and it is awesome! I recommend it as often as I can. Thumbs up to all involved! I'm...

aconaway1

I'll just leave this here. [alavg.txt](https://github.com/wb2osz/direwolf/files/5216655/alavg.txt)

LightningStalker

[bug] CWID clips last character with CM108 PTT

7

When configuring DireWolf to send CWID messages using the following command in the config file: `CBEACON delay=0:10 every=15 dest=MORSE-15 info="M1GEO"` I observe that "M1GE" is sent and the final "O"...

m1geo

dw-start on buster with rtl sdr won't start with cron job

3

So I upgraded mu RPi to buster, it's a Pi Zero W. Been using it for igate for a while with RTL SDR without issues. Running the following command on...

yaniveliash

Feature reqest: Run DW without any audio device

4

Currently DW fails to start if there is no audio device is present.

buhalo1