digipath: WIDE1-1,WIDE2-1 issue

[hwsu315]

Dear OM,

I found when using direwolf as the wide range digipeater which only repeat WIDE2 packets, the direwolf doesn't repeat WIDE1-1,WIDE2-1 packets.

In other words, for trackers with WIDE1-1,WIDE2-1 beacons and there are no fill-in digis surrounding by, the wide range direwolf digi hears it directly but does not repeat.

direwolf digipeater settings: DIGIPEAT 0 0 ^WIDE[3-7]-[1-7]$ ^WIDE2-[12]$ TRACE

As far as I understand, wide range digipeaters should repeat WIDE1-1,WIDE2-1 ; WIDE2-N ; but not WIDE1-1.

Thanks for investigating the issue. Regrards, Huawei Su 73 de BX2AI

[hwsu315]

Any updates about this issue?

[dranch]

Can you tell us about your setup? What version of Direwolf are you running? Can you show us some examples say give us a URL from aprs.fi RAW view so we can see some of the packets?

[wb2osz]

It is working properly. A digipeater only examines the first unused digipeater address in the via path. In this case, the digipeater only looks at WIDE1-1 and the configuration does not include anything to process WIDE1-n. You might find this useful: https://github.com/wb2osz/direwolf-doc/blob/main/APRS-Digipeaters.pdf There is an obscure digipeater option called preemptive digipeating which would probably help in this situation. I will make an example and share with you.

[hwsu315]

Thanks a lot for the info, I just start to study the "preemptive digipeating" function. I will go to read user-guide and try it. Regards, Huawei. 73 de BX2AI

[na7q]

You have a typo in your settings. Fix it with this at the tail end where you are missing the 1

^WIDE[12]-[12]