Kusuma Ruslan
Kusuma Ruslan
From the video, the your hardware seems fine, nothing broken or not attached correctly. Maybe the problem is your y min, the y endstop position. With your hardware configuration it...
Seems much better in the video. Now the problem i see is you have mistake in scara setting. From your previous post this is your setting. Your elbow min angle...
Your bed center angles are the angles positions that you want after touching endstops. They must be between min and max angles. On Mon, Apr 9, 2018, 23:11 Daniel Power...
There is a special g5 command for you to rotate according to angles. Example G5 x30 means you command x axis to rotate 30 degree counter clockwise G5 y-60 means...
Some values stored in eeprom. They doesnt change when you re-upload the firmware, you have to change them from eeprom or clear eeprom before re-upload On Tue, Apr 10, 2018,...
To clear eeprom you can upload clear eeprom code from arduino ide samples. On Tue, Apr 10, 2018, 02:46 Daniel Power wrote: > Hmm, alright, thank you, that is good...
my firmware is developed from repetier which is better for non cartesian than the others. I add some special functions for robotic arm, for instance to rotate individual angle rather...
I did https://youtu.be/ykZYwVhOh-k