IndexError: bytearray index out of range CF-RU5309

[ahvahsky2008]

Try connect to device by com port. Whats wrong?

[wabson]

Another user reported problems with the 53xx devices - see comments on 3966c4. So it's possible these aren't supported with the current code. Unfortunately I don't have one of these readers to test, the ones that have been tested are listed in README.md.

If either you or @Beastmazter have access to the manuals for this device and can post a link here then I can take a look over them to see if there's anything substantially different about them. Otherwise if you get it working via some other means please update this thread.

[Beastmazter]

@wabson Sorry, was lost down various rabbit oles then remembered I never got back to you. I do believe the 5300 series will not work, at least mine will not. It's HID, which pyserial does not support. The link to the documentation is http://www.chafon.com/DownLoad.aspx?page=3 The file is 5300 SDK. There are a few possible SDK downloads for this series of readers, however, i am fairly certain this is the best one.

I ended up getting an FM-503 so I could build the reader, antenna and pi into a smaller form factor. I have been using your project here as reference and help along the way. Thanks for making all this. Good luck with your project!

[DomolinBolivia]

I managed to make the correct reading, the manufacturer provided me with the sdk and now the code is in my repository

https://github.com/DomolinBolivia/CF-RU5309-RaspberryPi

SDK https://drive.google.com/drive/folders/1hPM4hObom5JWjDT9XOB34v9EcIeUUnZ6?usp=sharing

[Beastmazter]

Hello Everyone,

Been a long time since I world on this project, new job took all of my time and brain space. I am setting an alarm to dig through my files to see if I can find the manual for this, I know I had a lot of various files and things. Appreciate the responses. Now that I am happily divorced, I have been wanting to pick this project back up. but we will see, new job is very very demanding.

Have a good one!

On Thu, Nov 12, 2020 at 10:55 AM Will Abson @.***> wrote:

Another user reported problems with the 53xx devices - see comments on 3966c4 https://github.com/wabson/chafon-rfid/commit/3966c47795e70e6f2e7120bdaac51a8259881397. So it's possible these aren't supported with the current code. Unfortunately I don't have one of these readers to test, the ones that have been tested are listed in README.md https://github.com/wabson/chafon-rfid/blob/master/README.md.

If either you or @Beastmazter https://github.com/Beastmazter have access to the manuals for this device and can post a link here then I can take a look over them to see if there's anything substantially different about them. Otherwise if you get it working via some other means please update this thread.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/wabson/chafon-rfid/issues/5#issuecomment-726166198, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQBLPQPFV3F5C7BM4VHOFLDSPQAO3ANCNFSM4TTJJKLQ .

[ksandaru]

I need to modify and run the single-read.py for reading multiple rfid tags within a time duration (not all at once). When I use a while loop, I found a byte array index error. How can I continuously read tags?

[winkoman]

From what I've learned trying to connect my mu904 via serial port to raspberry pi the bytearray index out of range error occurs when empty bytearray is returned/read. So check first that you connection is working properly!