wa8lbz

The HMI image file in the project is 430x320 but the Nextion dispaly shown in the project is 320x240. Are their more than one HMI file. I could find no...

DAC Problem?

2

I have 17 presets in the ESP32 Radio 2.0 and they all play perfectly but one. 198.178.123.8:8454/;stream/1 sounds speeded up like playing a 33rpm record at 78rpm. I am using...

WiFi & Bluetooth

5

I am building the ESP32 Radio V2 project but without using internal speakers or ear phones. My radio consists of a EZSBC ESP32 board; PCM5102A I2S MP3 decoder board; VS1838B...

Problem with presets.

23

I have some problems with presets. They are itemized in this document: [Presets.txt](https://github.com/Edzelf/ESP32Radio-V2/files/8500547/Presets.txt)

Fails Setting Up Access Point

43

I purchased a new ESP32 DOIT DEVKIT. Used the pio run -t upload and pio run -t uploadfs commands to upload the current sketch and preferences. Both were successful. Nothing...

Nextion display does not work

40

I have the VS1053 module (MP3/ACC decoder), VS1338B module (IR), KCX_BT_EMITTER module (Bluetooth transmitter), BUT not the Nextion NX4024T032_011 display is not working. Other than the display the radio works...

Right or Wrong ESP32 board

51

The Hardware section of the ESP32-radio V2.0 Manual states that the ESP32 module is basically an ESP32 on a small print. You used a DOIT ESP32 Development Board. In the...

dbgprint

1

Problem verifying sketch in Arduno IDE. Stops at line 4030. Error message is: exit status 1 'dbgprint' was not declared in this scope. I don't understand why this error message...

Where is the main ino file?

1

I must be missing something because I can't locate the main ino file. Am I looking in the wronf place?