vochong

@brada4 Do you have any idea about this issue? Thanks.

@brada4, I used Luci to configure the STA and AP so I'm sure there's no config error. If the STA/client gets IP and AP is working at the same time...

@brada4 Have you been able to reproduce the problem as I mentioned for master snapshots? With both STA and AP configured and enabled on the same radio, just reset the...

@brada4 Please note the following particular log for phy1-sta0 when it could not acquire an IP address from the uplink. I configured a fixed channel (44) for both phy1-sta0 and...

@castillofrancodamian You filed a similar defect last year: https://github.com/openwrt/openwrt/issues/13449 For me, with master snapshots (kernel 6.6), neither automatic channel nor fixed channel for STA would work if both STA and...

The driver default for the country code in my devices is US. Even if I manually set it in the config, it does not help anything with the problem. The...

No change for r26289-61e8728d86 - No Wifi detected - LAN port is still the PoE port. As a matter of fact, the PoE port must be the WAN port by...

FYI, the same missing WIFI issue is seen in MR42 with master images. [mr42_kernel6.6_nowifi.log](https://github.com/openwrt/openwrt/files/15285136/mr42_kernel6.6_nowifi.log)

Hi @robimarko, If MR42/MR52 don't use PERST GPIO-s, any reason why they work well in 23.05.x ? Thanks.

@robimarko @Ansuel I did a hard reset to the commit 9a5b1af670185f07a797920f861a6033e61c5c61 (July 23 2023) around the time ipq806x was switched to 6.1. I saw the same failures. [ 10.897510] pcieport...